Hi Tramp,
Sorry for the delay in responding to your original query, which you posted back
in June.
I had to wait until the article went live, which just happened today.
Here is a fairly detailed answer to your original query, re: the correct way to
convert Touchstone insertion loss data into the channel impulse response:
https://www.signalintegrityjournal.com/articles/1847-impulse-response-from-insertion-loss
<https://www.signalintegrityjournal.com/articles/1847-impulse-response-from-insertion-loss>
Be sure to click on the Jupyter notebook link, at the very end of the article,
as it allows much further exploration of this topic than I was able to cover in
the article, due to space constraints.
Regards,
-db
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
