[SI-LIST] Accurately measure ceramic capacitors by extending VNA range

  • From: Martin Rowe <martin.rowe@xxxxxxxxxxxxx>
  • To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
  • Date: Thu, 29 Jun 2017 14:12:08 +0000

Using two methods outlined in this article by Steve Sandler, you can use a VNA 
to get measurements with a dynamic range of 164 dB.
http://www.edn.com/electronics-blogs/impedance-measurement-rescues/4458562/Accurately-measure-ceramic-capacitors-by-extending-VNA-range

Martin Rowe
Senior Technical Editor, Test & Measurement
+1-718-360-2348
martin.rowe@xxxxxxxxxxxxx<mailto:martin.rowe@xxxxxxx>
EDN Test & Measurement Design 
Center<http://www.edn.com/design/test-and-measurement>
EE Times Test & Measurement 
DesignLine<http://www.eetimes.com/test-and-measurement-designline.asp>
@measurementblue
@TMW_Community
[1470079655023_PastedImage]



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts:

  • » [SI-LIST] Accurately measure ceramic capacitors by extending VNA range - Martin Rowe