Hello everyone, I have a question on how to consider the common mode noise when measuring the DQS VIX (DDR IF). Below is my interconnect pattern: DQ1-DQ2-DQSP DQSN-DQ3-DQ4 I want to account CM xtalk coming onto DQS pair from the aggressors. I using same buffer for both DQ and DQS. Is it enough to consider CM Xtalk coming from DQ1 and DQ2. (or) should I consider CM Xtalk from all aggressors. Will there not be any cancellation of Xtalk as I am using same buffers for all nodes. Thanks, Murali ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu