Hi all, We have been simulating a differential microstrip using ADS Momentum. One weird thing we observed is that the loss is not monotonic. S21 rolls off as expected from DC to around 30G. However, from 30G, it increases until about 60G. Since it's just a simple transmission line, involving no discontinuities, shouldn't S21 be monotonic? Does anyone know what could be causing this problem? Thanks a million in advance. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu