You'll find allot of useful comments on that in the SI list archives. Big topic awhile back. Rich -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of CHRIS CROWLEY Sent: Thursday, September 20, 2001 9:17 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] 45 Degree Bends vs. Rounded Corners Hello- Could someone help me out with some info on when I should use rounded corners when routing as opposed to 45 degree bends. Does anyone have any info supporting/ denying either case? Thanks in advance. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu