Re: [Scoaa-members] LED Navigation Light Bulbs

  • From: Jack Hogan <jackho9@xxxxxxxxx>
  • To: scoaa-members@xxxxxxxxx
  • Date: Sat, 4 Sep 2010 00:20:27 -0700 (PDT)

Hi Mike,

When the housing of the stock anchor light of my 12 year old SW1000 crumbled in 
my hands a couple of years ago as I was trying to replace its bulb, I installed 
the Orca Green Marine Trianchor light in its place. It provides both anchoring 
and nav lights in one tight package with photodiode (turns itself on 
automatically at night and off in the morning) and strobe (easy to find your 
boat in dark nights at busy anchorages). They are coast guard approved and 
power 
consumption at anchor or navigating is less than a quarter what it used to be.

In order to have the strobe function I have had to run another (tiny, single) 
conductor down the mast: that was a real bitch of a job.  If I had to re-do it 

would probably buy the unit without the strobe so that I could just use the 
existing wires of the defunct anchor light.

Cheers,
Jack



________________________________
From: Michael Zotzky <mzotzky@xxxxxxxxxxx>
To: scoaa-members@xxxxxxxxx
Sent: Tue, August 31, 2010 1:44:35 AM
Subject: [Scoaa-members] LED Navigation Light Bulbs

 
Has anyone replaced the bulbs in their nav lights with LED bulbs? I think the 
Seawind 1000 has Aqua Signal 25 series lights.  Dr LED makes bulbs that fit, 
but 
there are lots of posts on sailboatowners website from people that were not 
happy with Dr LED bulb life, nor claims they are Coast Guard approved but not.  
The local chandlery that stocks both Dr LED and Ancor recommends the Dr LED for 
long life.  Conflicting advice.
 
Mike


      

Other related posts: