Dan,
Good work on getting the mirror flipped over tonight. Best of luck with the
welded plates and the new collimation bolts. If you need a hand with
anything just gives us a shout…….
Al
On Mon, Jul 11, 2016 at 6:13 PM, Nick Monkman <nmonkman@xxxxxxxxx> wrote:
Take pics!
On Jul 11, 2016 6:05 PM, "Alan Skinner" <skinneraf@xxxxxxxxx> wrote:
I will be there at 7:00 PM. I have a map visual on the address. I will
bring some gloves.........................
Alan
On Mon, Jul 11, 2016 at 6:01 PM, Daniel Bakken <dan@xxxxxxxxxxxxxxxxxxxxx
wrote:
Alan,
Thanks, I’ve got Dale Isley, and my brother coming at 7:00 PM, if that
works.
13216 N Peone Rd
Give me a call if you need more info, or this doesn’t work, Thanks!
Dan
869-3911
*From:* sas-bounce@xxxxxxxxxxxxx [mailto:sas-bounce@xxxxxxxxxxxxx] *On
Behalf Of *Alan Skinner
*Sent:* Monday, July 11, 2016 5:37 PM
*To:* SAS - Mailing List <sas@xxxxxxxxxxxxx>
*Subject:* [SAS] Re: Need a couple of hands tonight
How about 6:30 PM ? What is your address?
Alan
On Mon, Jul 11, 2016 at 5:03 PM, Nick Monkman <nmonkman@xxxxxxxxx>
wrote:
I'd sure like to come help but I can't make it tonight :(
I can possibly come out tomorrow if you still need a hand (or hands)
then
On Mon, Jul 11, 2016 at 4:42 PM, Daniel Bakken <
dan@xxxxxxxxxxxxxxxxxxxxx> wrote:
Thanks, Dale, I’m guessing after dinner, whenever works for people.
I’m hoping for a couple more people…
Dan
*From:* sas-bounce@xxxxxxxxxxxxx [mailto:sas-bounce@xxxxxxxxxxxxx] *On
Behalf Of *Coylene and Dale Isley
*Sent:* Monday, July 11, 2016 2:24 PM
*To:* Spokane Astronomical Society <sas@xxxxxxxxxxxxx>
*Subject:* [SAS] Re: Need a couple of hands tonight
I'm available... let me know... what time are you thinking about?
--
Dale Isley
509-922-8785
------------------------------
From: dan@xxxxxxxxxxxxxxxxxxxxx
To: sas@xxxxxxxxxxxxx
Subject: [SAS] Need a couple of hands tonight
Date: Mon, 11 Jul 2016 14:06:47 -0700
Hey SAS people,
I need two or three guys to help me work on Hercules, it will only take
a few minutes, but I need to turn the mirror cell and mirror assembly over
to work on it. The collimation bolts need work, and this step is required
to do that. Please let me know if a few of you could be available tonight.
I’m east of Mead in the Peone Prairie area. Hoping to be ready for Table
Mountain, where I’ll be giving a presentation on the telescope.
Thanks!!!
