I have a partially constructed Mirror-O-Matic that I either need to use or get rid of. I have a pair of 6” blanks with aspirations to make a 14 reflector on a Palomar type mount. Beevo K7BVO From: sac-forum-bounce@xxxxxxxxxxxxx [mailto:sac-forum-bounce@xxxxxxxxxxxxx] On Behalf Of pulind@xxxxx Sent: Monday, January 02, 2012 11:53 AM To: sac-forum@xxxxxxxxxxxxx Subject: [sac-forum] Re: ATM meeting is Tuesday - possible craziness Beevo, I have a table-top polishing maching that I picked up at a swap meet. It's homemade and I think it's similar to a Mirror-O-Matic. Also, it's rather under-powered but can polish a 6 inch mirror without a problem. Paul ----- Original Message ----- From: Bill VanOrden <beevo1@xxxxxxx> To: sac-forum@xxxxxxxxxxxxx Sent: Sun, 01 Jan 2012 22:58:44 -0500 (EST) Subject: [sac-forum] Re: ATM meeting is Tuesday - possible craziness Speaking of mirror making and laps, has anyone built and used the Mirror-O-Matic? Beevo K7BVO From: sac-forum-bounce@xxxxxxxxxxxxx [mailto:sac-forum-bounce@xxxxxxxxxxxxx] On Behalf Of pulind@xxxxx Sent: Sunday, January 01, 2012 5:54 PM To: sac-forum@xxxxxxxxxxxxx; az-observing@xxxxxxxxxxxxx Subject: [sac-forum] ATM meeting is Tuesday - possible craziness The ATM/Astro-imaging meeting is Tuesday at my place starting around 6 pm, or when you can make it. I'm planning on pouring a pitch lap for a mirror that Lynn Blackburn is making. That can be a spectacle if anything goes wrong. Paul Lind 210 W. Tierra Buena Lane Phoenix, AZ 602-350-6190 (Cell)