[rollei_list] Re: Rollei Tropical Case

  • From: Peter <petermattei@xxxxxxxxx>
  • To: rollei_list@xxxxxxxxxxxxx
  • Date: Wed, 8 May 2019 21:14:00 -0700

I have two for the 6X6 and one in grey for the 4x4.  One was repainted due
to its severe service history in the US Navy.  I painted it in a military
sage green.  The other two are minty.  Clearly, these were built to protect
the cameras from the worst conditions imaginable.

On Wed, 8 May 2019 at 20:09, CarlosMFreaza <cmfreaza@xxxxxxxxx> wrote:

There are only two versions for the Rollei Tropical metal case, one of
them for the Rollei TLR 6x6 with Rolleifix groove and another one for the
4x4.. My Metal case works perfect for the 2;8 and 3,5 F,  2,8C and T and
'cord IV
Carlos

El mié., 8 de may. de 2019 23:06, Shannon Hong <triode12@xxxxxxxxxxx>
escribió:

There are different versions of the Tropical case - some are made for the
later cameras like the F models and the others for the earlier models.
And you cannot tell which is which without looking inside.
------------------------------
*From:* rollei_list-bounce@xxxxxxxxxxxxx <
rollei_list-bounce@xxxxxxxxxxxxx> on behalf of F.W. Stutterheim <
dmarc-noreply@xxxxxxxxxxxxx>
*Sent:* Thursday, 9 May 2019 4:46 AM
*To:* Rollei List
*Subject:* [rollei_list] Re: Rollei Tropical Case

Hello Carlos,

Congratulations! I am familiar with the tropical case. It is offered on
camera fairs over here occasionally. I understand that the tube for Silica
gel desiccant is present. That is good, it is quite often missing.

Ferdi.
----
Ferdi Stutterheim,
Drachten, Netherlands.

Op 8 mei 2019, om 19:26 heeft CarlosMFreaza <cmfreaza@xxxxxxxxx> het
volgende geschreven:

Yesterday I received a Rollei Tropical metal  case in very good
condition. It's hardly bigger and wider than a TLR camera, however it has
room for a lens hood. It's light despite the robust metal construction and
designed to float on the water with the camera inside. You slide the camera
into the basis using the Rolleifix groove, the basis has a pivot mechanism,
this way the camera reaches the vertical up position when you open the
frontal door and you can take photos, the same way the camera is kept in
the vertical down position when you close the frontal door. It has a tube
for silica gel. This case looks more practical and safer than the  ever
ready case and it's provided with a leather strap. I will upload some
images when I have time to do it.
Carlos




-- 





*This message is intended for a particular addressee only and may contain
business or company secrets. If you have received this email in error,
please contact the sender and delete the message immediately. Any use of
this email, including saving, publishing, copying, replication or
forwarding of the message or the contents is not permitted. *

Other related posts: