is there a jpg of the prototype
also I am looking for a 2.8F Aurum or GX or any similar TO USE (yes use) thanks for your candor and fun listings and support of use film burning sickos
Mark in Portland
On Nov 2, 2007, at 9:46 AM, Harry Fleenor wrote:
- Rolleiflex Prototype, model K1, 610. This is one of only two of the Original Rolleiflex Prototypes known to be surviving from the original ten that were produced. The other is in the Brunswick city Museum in Germany. This camera was most likely handled, shaped and used by Reinhold Heidecke. Put this one in your Rolleiflex museum - $10,000.00
- Rolleiflex 2.8GX Special 60th year edition. Complete in box with book, Rolleinar cap and strap.
2.8/80 HFT Planar lens. Shutter, transport meter check ok. $3590.
- Rolleiflex 2.8F Aurum, 2.8/80 Schneider Xenotar lens
Meter. Gold Whiteface. Complete with teak box. Shutter, transport meter check ok. $4990.
- Rolleiflex 2.8F Aurum, 2.8/80 Schneider Xenotar lens
Meter. Gold Whiteface. Camera only. Shutter, transport meter check ok. $4850.
- #43 2.8 F type 1, 2.8/80 CZ Planar, Meter. Has flat glass back. Like new.
Including shutter and transport overhaul - $1799.
- #42 Rolleiflex 2.8E3, 2.8/80 CZ Planar. Camera is like new except for few small hard to see chips on the outer surface of the taking lens. These are hard to see and won't affect the photos. Meter, case and lens cap. Shutter, transport and meter check ok. $799.
If you want to add the shutter and transport overhaul to this one, add $268.
- # 35 Rolleiflex 2.8A, Type 1, 2.8/80 Zeiss Opton Tessar, case, lens cap. Shutter and transport check ok.
Note, this Rolleiflex is rare and typically has a soft lens. $599.
- # 34, Rolleiflex 2.8A, Type 1, 2.8/80 Zeiss Jena Tessar, case, lens cap. Shutter slow and transport check ok.
Note, this Rolleiflex is very rare and typically has a soft lens. $699.
- #25 Rolleiflex 3.5E, 3.5/75 Carl Zeiss Planar, Meter not working, case and lens cap. Transport works but is stiff. Self timer sticking. Shutter slow speeds overexposing 1/2 stop. $599.
- #20, Rolleiflex Automat MX, 3.5/75 Zeiss, Opton T Tessar, Case, Lens cap, new strap, Original Rolleiflex Box. This is like new in the box. The front surface of the taking lens has what looks like a bubble. This doesn't affect the photos. Shutter and transport ok. $499.
- Rolleicord Vb type 2, #266xxxx. Whiteface. Schneider Xenar lens. Very clean.
*Lens cap and case*. $599.
Shutter is useable as is but I recommend a shutter overhaul now or in the future. Add $134 for a shutter overhaul. The transport checks ok..
- Rolleicord Vb type 1 #260xxxx,Schneider Xenar lens, lens cap and case - some stitching on the case is loose. $599.
Slow speeds are slow. Add $134 for a shutter overhaul. Transport checks ok.
- Rolleicord Va #158xxxx, Schneider Xenar lens, lens cap and case, -$499.
Shutter and transport are ok.
- Rolleiflex Automat MX-EVS, lens cap, case - 149xxxx 3.5/75 Schneider Xenar lens, mirror lens cap, case -$399.
The transport is stiff but working. Shutter is working ok.
Can be used as is for now, maintenance can be deferred
- Rolleiflex Automat 3, 106xxxx, Zeiss Tessar lens, mirror lens cap, case -$299.
Needs shutter overhaul add $134.. Transport is working ok.
This camera does not have flash sync. or double exposure capability.
- Rolleiflex T, 231xxxx, whiteface, meter, lens cap.- $499.
Needs shutter and transport overhaul add $268.
Thank You
Harry Fleenor
Oceanside Camera Repair
909 Aviation Blvd. #4
Manhattan Beach, Ca 90266
310 374 6506 - email - harry@xxxxxxxxxxxxxxxxx
Web site - < http://www.rolleirepairs.com/>
Harry Fleenor has over 40 years experience on Rollei camera repair including 15 years working in the factory service centers of Honeywell and Rollei of America.
Repairing Rolleiflex TLRs, (including Rolleiflex 2.8F, 3.5F, Rolleiflex 2.8E-3, 2.8E-2, 2.8E, 2.8D, 2.8C, , 2.8B, 2.8A, Rolleiflex 3.5E-3, 3.5E-2, 3.5E, 3.5, Automat X, 3.5 Automat MX, Automat MX E-V, Tele Rolleiflex, Wide-Angle Rolleiflex, Rolleicord Vb, Va, V, IV, and Rolleiflex T) Rollei SL66, Rollei 35, Rollei SL35, Rollei A110, and E110, and the Rollei SL26.
Rollei 35 calibrated to 1.35v or 1.5v battery.
Maxwell bright screens installed.
220 switch installed.
