For those of our readers not familiar with the different configurations of film presure plate in a Rollei TLR, I have put here (on our dedicated rollei-flickr group) a drawing regarding the "normal" film gate and the one with the glass pressure plate. The spacing of 0.45mm is mentioned in one of Claus Prochow's books (probably : Rollei Technical Report)
http://farm4.static.flickr.com/3411/4573709647_4a8794f5b6_o_d.jpgI have no idea about the specifications regardin the 3-rd setting for 35 mm film use with the rolleikin; but as far as we know, there was never any 4-th setting for 220 rollfilm (without backing paper).
-- E.B. --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at //www.freelists.org/archives/rollei_list
