[roc-chat] Re: Shock cord attachment points
- From: "Ken Curran" <rocket1dog@xxxxxxx>
- To: <roc-chat@xxxxxxxxxxxxx>
- Date: Sun, 22 May 2011 15:24:09 -0700 (Pacific Daylight Time)
thanks.
kwc
-------Original Message-------
From: Steve Trammell
Date: 5/22/2011 10:51:55 AM
To: roc-chat@xxxxxxxxxxxxx
Subject: [roc-chat] Re: Shock cord attachment points
In these size tubes I glue a section of kevlar shock cord to the motor mount
and thread it up through a cut out in the top centering ring. You can
fasten a nylon cord to the kevlar 'strap' for extra length and shock
absorption.
Steve Trammell
On Sat, May 21, 2011 at 11:42 AM, Ken Curran wrote:
FLAVOR00-NONE-0000-0000-000000000000 0.000000 ; I am looking for
suggestions anchor point for the shock cord (kevlar) in a 2.6" BT. The top
centering ring is about 24" from the top of the BT.
I am also using a fireball to prevent zippers.
Thanks
kwc
Other related posts:
