[roc-chat] Re: Equipment Protocol, Important - Please Read

  • From: Richard Dierking <richard.dierking@xxxxxxxxx>
  • To: roc-chat@xxxxxxxxxxxxx
  • Date: Wed, 15 Aug 2012 10:11:51 -0700

Frankly, some people seem to be better at this.  I'm getting better, but
it's taken lots of practice.

The most important thing is not to get so frustrated that you start
'jamming' the connectors together.  You must know when to just walk away
and yell "Rick Magee!"  :-)

Richard
On Wed, Aug 15, 2012 at 9:49 AM, Kurt Gugisberg <kurtgug@xxxxxxxxxxxxx>wrote:

> I always have trouble with those connectors.  How about some indexing
> marks on them so the lining up of the pins and holes is more idiot proof.
>
> Kurt (the idiot in question here) Gugisberg
>
>
> -----Original Message-----
> >From: rtd@xxxxxxxxxxxx
> >Sent: Aug 15, 2012 9:31 AM
> >To: roc-chat@xxxxxxxxxxxxx
> >Subject: [roc-chat] Re: Equipment Protocol, Important - Please Read
> >
> >Unfortunately, I suspect that anyone who would blindly try to shove a
> >multi-pin connector in without looking at its orientation, or attempt to
> >insert it into a socket with too few holes, is not going to be real
> >likely to read warning labels or signs, either.
> >
> >  - Rick D.
> >
> >On 2012-08-15 09:25, Michael Klett wrote:
> >> Great idea!  I'd also suggest making small ones with appropriate tips
> >> to tape on to the back of the launch control boxes next to the
> >> connector there.
> >>
> >> Thanks,
> >> Mike
> >>
> >> On Wed, Aug 15, 2012 at 9:19 AM, Richard Dierking
> >> <richard.dierking@xxxxxxxxx> wrote:
> >>> What do you all think of a little sign by the back of trailer with
> >>> these
> >>> tips to maintain the cables?
> >>>
> >>> Richard
> >
> >
> >--
> >ROC-Chat mailing list
> >roc-chat@xxxxxxxxxxxxx
> >//www.freelists.org/list/roc-chat
> >
>
>
> --
> ROC-Chat mailing list
> roc-chat@xxxxxxxxxxxxx
> //www.freelists.org/list/roc-chat
>
>

Other related posts:

  1. Home
  2. roc-chat
  3. Archive
  4. 08-2012