You can use imager with JAWS as well, just use arrow keys to navigate.
You can expand sub menus with spacebar or right arrow.
For advanced options, press ctrl+shift+x.
2022-03-04 21:02 GMT+02:00, Sukil Etxenike arizaleta
<dmarc-noreply@xxxxxxxxxxxxx>:
Hello,
My name is Sukil. I am from Spain and I like tinkering with tech stuff
(tbh software only). I've bought a Raspberry Pi 4B recently and I'm
currently setting it up (helped by my family in the hardware setup).
Just a quick e-mail to say that Raspberry Pi Imager, at least in its
latest (1.7.1) version is accessible in Windows with NVDA (only when
NVDA is installed), contrary to what's suggested in the raspberryvi
website. I could navigate it just fine with tab and arrows. The only
lacking thing was that I couldn't see the progress when writing an image
to the SD card.
Best,
Sukil
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
