[racktables-users] Re: Problem after upgrade to 0.17.0
- From: Rui Carlos Henriques <Rui.Henriques@xxxxxxxxxxxx>
- To: "racktables-users@xxxxxxxxxxxxx" <racktables-users@xxxxxxxxxxxxx>
- Date: Fri, 29 May 2009 16:49:13 +0100
You are right. I edit the file (hex editor), remove first char, and I can see
the image.
Rui
-----Original Message-----
From: racktables-users-bounce@xxxxxxxxxxxxx
[mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Panagiotis Christias
Sent: sexta-feira, 29 de Maio de 2009 15:54
To: racktables-users@xxxxxxxxxxxxx
Subject: [racktables-users] Re: Problem after upgrade to 0.17.0
Denis Ovsienko wrote:
>> In attach you will find one of the images.
>
> Hello.
>
> After a review I can say, that the issue is completely odd and it seems
> to have none of the causes I was previously suspecting. I don't
> currently have an opportunity to reproduce exact configuration of the
> failing system locally, but there are yet ways to get this resolved
> in reasonable time:
>
> 1. Try runing the software on a freshly installed system, which is
> known-good for this purpose (e.g. Fedora or openSUSE).
> 2. Setup a mean for me to access existing system, so I can log in and
> debug.
Looks like there is an extra new line character in the beginning of the
produced PNG image file :-?
--
Panagiotis J. Christias Network Management Center
p.christias@xxxxxxxxxxx National Technical Univ. of Athens, GREECE
Other related posts:
