[racktables-users] Re: Patchpanels
- From: "Tyler J. Wagner" <tyler@xxxxxxxxxxx>
- To: racktables-users@xxxxxxxxxxxxx
- Date: Thu, 1 Oct 2009 16:07:47 +0100
The obvious solution is to have pairs of ports in the patch panels:
patchpanel-A-port-1-frontside
patchpanel-A-port-1-backside
And then connect backside to patchpanel-B-port-1-backside.
Tyler
On Thursday 01 October 2009 14:07:44 Sander Klein wrote:
> Hi,
>
> Is it possible to connect ports from patchpanels with eachother? It would
> be nice to have something like: switch-A-port-15 is connected to
> patchpanel-A-port-1 which in turn goes to patchpanel-B-port-1 which then
> connects to switch-B-port-12. It would be totally wicked if it's also
> possible to define the type of cabling used between the patchpanels ie:
> CAT5, CAT5E, singlemode fiber or multimode fiber etc...
>
> Regards,
>
> Sander
>
--
"One of the main causes of the fall of the Roman Empire was that,
lacking zero, they had no way to indicate successful termination of
their C programs."
-- Robert Firth
Other related posts:
