Walery, If you could generate a diff of your changes and send it on we can review it and one of the dev staff will get it added to the trunk if that is truly where it needs to be. Ryan Farrington Senior Systems Engineer MedAssets Direct 972.244.0312 | Cell 972.836.6431 | 5556 Tennyson Pkwy Suite 200, Plano, TX 75024 www.medassets.com *****Attention***** This electronic transmission may contain confidential, sensitive, proprietary and/or privileged information belonging to the sender. This information, including any attached files, is intended only for the persons or entities to which it is addressed. Authorized recipients of this information are prohibited from disclosing the information to any unauthorized party and are required to properly dispose of the information upon fulfillment of its need/use, unless otherwise required by law. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by any person or entity other than the intended recipient is prohibited. If you have received this electronic transmission in error, please notify the sender and properly dispose of the information immediately. -----Original Message----- From: racktables-users-bounce@xxxxxxxxxxxxx [mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Walery Wysotsky Sent: Tuesday, January 11, 2011 5:17 AM To: racktables-users@xxxxxxxxxxxxx Subject: [racktables-users] LDAP group membership Hello, I changed module inc/auth.php . Now it is possible to gather group members for LDAP servers, different from MS ActiveDirectory (I use Novell eDirectory) and use it in permission checks (lgcn_ tag). How include this changes to mainstream, if someone needs it? Best regards, Walery