[racattack] [INS-41112] Specified network interface doesn't maintain connectivity across nodes.
- From: Hanh Nguyen <hanhnguyen2100@xxxxxxxxx>
- To: Racattack <racattack@xxxxxxxxxxxxx>
- Date: Sat, 19 Apr 2014 14:52:00 -0400
Alvaro,
What you suggested works. OUI was displayed for section ".2 Install Grid
Infrastructure". I was able to enter values for step 1-11. However, at Step
12, figure 112 RA-Oracle_GI_12101-Install-Identify-Network, the IP address
values displayed on the screen are different from what shown in the
Wikibook:
http://en.wikibooks.org/wiki/File:RA-Oracle_GI_12101-Install-Identify_Network_Interfaces.PNG
[image: File:RA-Oracle GI 12101-Install-Identify Network Interfaces.PNG]
On the screen, I see these values are different:
*eth0 10.0.2.0 *
*eth1 192.168.78.0*
*eth2 172.16.100.0*
There is no way to change the incorrect IP addresses. The only this screen
allow change is the 'Used for' column, so I change the 'Used for' column
to the suggested values, click Next and these errors messages are displayed:
*[INS-41112] Specified network interface doesn't maintain connectivity
across nodes*.
*Cause - Installer has detected that network interface eth0 does not
maintain connectivity on all cluster nodes. Action - Ensure that the
chosen interface has been configured across all cluster nodes. Additional
Information:*
* - PRVF-7617 : Node connectivity between "collabn1 : 10.0.2.15" and
"collabn2 : 10.0.2.15" failed - Cause: Node connectivity between the two
interfaces identified ( <node> : <IP addr> ) could not be verified. -
Action: Verify the interface configurations for the network interfaces
identified on the nodes indicated using utilities like ipconfig or ping.
Summary of the failed nodes collabn2 - PRVG-1172 : The IP address
"10.0.2.15" is on multiple interfaces "eth0,eth0" on nodes
"collabn1,collabn2" - Cause: The given IP address was found on multiple
interfaces, when an IP address can be on at most one interface. - Action:
Remove the given IP address from all but one interface on each node.
collabn1 - PRVG-1172 : The IP address "10.0.2.15" is on multiple
interfaces "eth0,eth0" on nodes "collabn1,collabn2" - Cause: The given IP
address was found on multiple interfaces, when an IP address can be on at
most one interface. - Action: Remove the given IP address from all but
one interface on each node. collabn1 : 10.0.2.15*
What should I do?
Hanh,
On Thu, Apr 17, 2014 at 11:32 PM, Alvaro Miranda Aguilera <kikitux@xxxxxxxxx
> wrote:
> with putty login as grid
> start vnc, connect with vnc
>
> cd /u01/stage
> unzip the 2 grid zip files
> run /u01/stage/grid/runInstaller
>
>
>
>
> On Fri, Apr 18, 2014 at 3:04 PM, Hanh Nguyen <hanhnguyen2100@xxxxxxxxx>wrote:
>
>> Alvaro and Everyone,
>> 'vagrant up' command has been completed withour any problem. For more
>> details, please see atttached vagrant_up_logfile.txt.
>> I then proceed to login as root to Linux via PuTTY,. Then become grid
>> user via command 'su - grid' then at "Step7.2 Install Grid Infrastructure",
>> I ran the command:
>> * /media/sf_12cR1/grid/runInstaller*
>> and encountered this error below.
>> Hanh,
>> [grid@collabn1 ~]$ df -h
>> Filesystem Size Used Avail Use% Mounted on
>> /dev/sda3 27G 1.9G 24G 8% /
>> tmpfs 2.7G 0 2.7G 0% /dev/shm
>> /dev/sda1 485M 94M 367M 21% /boot
>> /dev/sdb1 50G 180M 48G 1% /u01
>> /vagrant 920G 253G 667G 28% /vagrant
>> /media/sf_12cR1 920G 253G 667G 28% /media/sf_12cR1
>> /media/stagefiles 920G 253G 667G 28% /media/stagefiles
>> [grid@collabn1 ~]$* /media/sf_12cR1/grid/runInstaller*
>>
>> The file oraparam.ini is missing, hence the Oracle Universal Installer
>> cannot be run. Please ensure a valid oraparam.ini file is present in the
>> install directory.: No such file or directory
>> Starting Oracle Universal Installer...
>>
>> [grid@collabn1 ~]$ *pwd*
>> */home/grid*
>> [grid@collabn1 ~]$ *cd /media/sf_12cR1/grid*
>> [grid@collabn1 grid]$ pwd
>> */media/sf_12cR1/grid*
>> [grid@collabn1 grid]$ ls -l
>> total 18
>> drwxrwxr-x 1 grid oinstall 4096 Apr 18 02:35 install
>> drwxrwxr-x 1 grid oinstall 0 May 24 2013 response
>> drwxrwxr-x 1 grid oinstall 0 Apr 17 06:28 rpm
>> -rwxrwxr-x 1 grid oinstall 5092 Dec 21 2012 runcluvfy.sh
>> -rwxrwxr-x 1 grid oinstall 7809 May 24 2013 runInstaller
>> drwxrwxr-x 1 grid oinstall 0 Apr 17 06:28 sshsetup
>> drwxrwxr-x 1 grid oinstall 0 Apr 17 06:28 stage
>> -rwxrwxr-x 1 grid oinstall 500 Jun 10 2013 welcome.html
>> [grid@collabn1 grid]$ *cd install*
>> [grid@collabn1 install]$ ls -l
>> total 233
>> -rwxrwxr-x 1 grid oinstall 28 May 24 2013 addLangs.sh
>> -rwxrwxr-x 1 grid oinstall 275 Jan 16 2013 attachHome.sh
>> -rwxrwxr-x 1 grid oinstall 7499 Jan 16 2013 clusterparam.ini
>> -rwxrwxr-x 1 grid oinstall 542 May 24 2013 cvu.ini
>> -rwxrwxr-x 1 grid oinstall 181 Jan 16 2013 detachHome.sh
>> drwxrwxr-x 1 grid oinstall 0 Apr 17 06:28 images
>> -rwxrwxr-x 1 grid oinstall 64797 May 24 2013 lsnodes
>> -rwxrwxr-x 1 grid oinstall 242 Aug 28 2007 mvstubs.sh
>> -rwxrwxr-x 1 grid oinstall 2096 May 24 2013 oraparam.ini.deinstall
>> -rwxrwxr-x 1 grid oinstall 6437 May 24 2013 oraparamsilent.ini
>> drwxrwxr-x 1 grid oinstall 4096 Apr 17 06:28 resource
>> -rwxrwxr-x 1 grid oinstall 107 Jan 16 2013 runInstaller.sh
>> -rwxrwxr-x 1 grid oinstall 145976 Jan 16 2013 unzip
>> [grid@collabn1 install]$
>>
>>
>> On Thu, Apr 17, 2014 at 10:12 PM, Hanh Nguyen
>> <hanhnguyen2100@xxxxxxxxx>wrote:
>>
>>> OK, Alvaro.
>>> vagrant status
>>> vagrant destroy
>>> vagrant up
>>> It's running to create and start up the VM machines...
>>> Hanh,
>>>
>>> C:\Users\hanhnguyen\Documents\RAC-Attack Lab\Softwares
>>> Require\Vagrantfile-maste
>>> r\OracleLinux\racattack12cR1>*vagrant status*
>>>
>>> collabn2 eth1 lanip :192.168.78.52
>>> collabn2 eth2 privip :172.16.100.52
>>> collabn2 dns server role is slave
>>>
>>> collabn1 eth1 lanip :192.168.78.51
>>> collabn1 eth2 privip :172.16.100.51
>>> collabn1 dns server role is master
>>> Current machine states:
>>>
>>> collabn2 poweroff (virtualbox)
>>> collabn1 poweroff (virtualbox)
>>>
>>> This environment represents multiple VMs. The VMs are all listed
>>> above with their current state. For more information about a specific
>>> VM, run `vagrant status NAME`.
>>>
>>> C:\Users\hanhnguyen\Documents\RAC-Attack Lab\Softwares
>>> Require\Vagrantfile-maste
>>> r\OracleLinux\racattack12cR1>*vagrant destroy*
>>>
>>> collabn2 eth1 lanip :192.168.78.52
>>> collabn2 eth2 privip :172.16.100.52
>>> collabn2 dns server role is slave
>>>
>>> collabn1 eth1 lanip :192.168.78.51
>>> collabn1 eth2 privip :172.16.100.51
>>> collabn1 dns server role is master
>>> collabn1: Are you sure you want to destroy the 'collabn1' VM? [y/N] y
>>> ==> collabn1: Destroying VM and associated drives...
>>> ==> collabn1: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn1: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn1: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn1: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn1: Running cleanup tasks for 'shell' provisioner...
>>> collabn2: Are you sure you want to destroy the 'collabn2' VM? [y/N] y
>>> ==> collabn2: Destroying VM and associated drives...
>>> ==> collabn2: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn2: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn2: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn2: Running cleanup tasks for 'shell' provisioner...
>>> ==> collabn2: Running cleanup tasks for 'shell' provisioner...
>>>
>>> C:\Users\hanhnguyen\Documents\RAC-Attack Lab\Softwares
>>> Require\Vagrantfile-maste
>>> r\OracleLinux\racattack12cR1>*vagrant up*
>>>
>>> collabn2 eth1 lanip :192.168.78.52
>>> collabn2 eth2 privip :172.16.100.52
>>> collabn2 dns server role is slave
>>> on first boot shared disks will be created, this will take some time
>>>
>>> collabn1 eth1 lanip :192.168.78.51
>>> collabn1 eth2 privip :172.16.100.51
>>> collabn1 dns server role is master
>>> Bringing machine 'collabn2' up with 'virtualbox' provider...
>>> Bringing machine 'collabn1' up with 'virtualbox' provider...
>>> ==> collabn2: Importing base box 'racattack/oracle65'...
>>> ==> collabn2: Matching MAC address for NAT networking...
>>> ==> collabn2: Checking if box 'racattack/oracle65' is up to date...
>>> ==> collabn2: Setting the name of the VM: collabn2.1404172206
>>> ==> collabn2: Clearing any previously set network interfaces...
>>> ==> collabn2: Preparing network interfaces based on configuration...
>>> collabn2: Adapter 1: nat
>>> collabn2: Adapter 2: hostonly
>>> collabn2: Adapter 3: hostonly
>>> ==> collabn2: Forwarding ports...
>>> collabn2: 22 => 2222 (adapter 1)
>>> ==> collabn2: Running 'pre-boot' VM customizations...
>>>
>>>
>>>
>>>
>>>
>>> On Thu, Apr 17, 2014 at 7:38 PM, Alvaro Miranda Aguilera <
>>> kikitux@xxxxxxxxx> wrote:
>>>
>>>> you are using Vagrant, so vagrant work with a vagrant user.
>>>>
>>>>
>>>> Did you did a vagrant destroy as I suggested to start with fresh
>>>> install?
>>>>
>>>> since you did a lot of manual work and the creation failed.
>>>>
>>>> if you do vagrant destroy it won't download again the 1hour file, that
>>>> file is saved , so will be quick
>>>>
>>>> so please do vagrant destroy
>>>>
>>>> then vagrant up
>>>>
>>>>
>>>> On Fri, Apr 18, 2014 at 5:20 AM, Hanh Nguyen
>>>> <hanhnguyen2100@xxxxxxxxx>wrote:
>>>>
>>>>> Hi Erik,
>>>>>
>>>>> The owner of the dir and unzipped files is grid. By the way, these are
>>>>> VM machines have been created using Attack Automation project and Alvaro
>>>>> has been tremendous help resolving issues I encountered during the
>>>>> installation process.
>>>>>
>>>>> Last night I tried unzip the 2 grid zipped files on the PC side before
>>>>> startup vagrant and when I do a "vagrant up" from the PC side, I
>>>>> observed that when do a 'ls -l' command in collabn1/Linux, it shown the
>>>>> owner of the unzipped files is vagrant! That is strange, because I never
>>>>> see that before. It is either owned by root or oracle.
>>>>>
>>>>> Hanh,
>>>>>
>>>>>
>>>>> On Thu, Apr 17, 2014 at 8:41 AM, Erik Benner <erik@xxxxxxxxx> wrote:
>>>>>
>>>>>> Does the oracle user own the directory? Try unzipping from windows
>>>>>> first.
>>>>>>
>>>>>> Sent from my iPad Air
>>>>>>
>>>>>> On Apr 17, 2014, at 6:56 AM, Hanh Nguyen <hanhnguyen2100@xxxxxxxxx>
>>>>>> wrote:
>>>>>>
>>>>>> I unzip the 4 zip files (2 for grid; 2 for database)
>>>>>> -I used grid user to create the hook with vncserver
>>>>>> -The size of "du-sh grid" is 2.1G:
>>>>>>
>>>>>> *[grid@collabn1 sf_12cR1]$ du -sh grid*
>>>>>>
>>>>>> *2.1G grid*
>>>>>>
>>>>>> -Tried to put these 4 zip files under /stagefiles mountpoint but when
>>>>>> attempting to unzip the 1st zip file for grid SW, I got these errors:
>>>>>> *checkdir error: cannot create grid*
>>>>>> * Permission denied*
>>>>>> * unable to process grid/rpm/cvuqdisk-1.0.9-1.rpm.*
>>>>>> *checkdir error: cannot create grid*
>>>>>> * Permission denied*
>>>>>> * unable to process grid/runcluvfy.sh.*
>>>>>> Hanh,
>>>>>> [grid@collabn1 stagefiles]$ pwd
>>>>>> /media/stagefiles
>>>>>> [grid@collabn1 stagefiles]$ df -h
>>>>>> Filesystem Size Used Avail Use% Mounted on
>>>>>> /dev/sda3 27G 2.4G 23G 10% /
>>>>>> tmpfs 2.7G 0 2.7G 0% /dev/shm
>>>>>> /dev/sda1 485M 94M 367M 21% /boot
>>>>>> /dev/sdb1 50G 180M 48G 1% /u01
>>>>>> /vagrant 920G 258G 663G 28% /vagrant
>>>>>> /media/sf_12cR1 920G 258G 663G 28% /media/sf_12cR1
>>>>>> /media/stagefiles 920G 258G 663G 28% /media/stagefiles
>>>>>> [grid@collabn1 stagefiles]$ cd /media/sf_12cR1
>>>>>> [grid@collabn1 sf_12cR1]$ ls
>>>>>> 1554900.zip database readme.txt
>>>>>> cvupack_Linux_x86_64.zip grid sshUserSetup.expect
>>>>>> cvuqdisk_install.sh keep sshUserSetup.sh
>>>>>> *[grid@collabn1 sf_12cR1]$ du -sh grid*
>>>>>> *2.1G grid*
>>>>>> [grid@collabn1 sf_12cR1]$ pwd
>>>>>> /media/sf_12cR1
>>>>>> [grid@collabn1 sf_12cR1]$
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, Apr 17, 2014 at 3:52 AM, Alvaro Miranda Aguilera <
>>>>>> kikitux@xxxxxxxxx> wrote:
>>>>>>
>>>>>>> were the 2 zip files unzipped?
>>>>>>> what user was used to create the vnc?
>>>>>>>
>>>>>>> what is the size of the folder? du -sh grid
>>>>>>>
>>>>>>> can you cd /u01/stage
>>>>>>> and unzip here?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Apr 17, 2014 at 6:52 PM, Hanh Nguyen <
>>>>>>> hanhnguyen2100@xxxxxxxxx> wrote:
>>>>>>>
>>>>>>>> I'm at Step "7.2 Install Grid Infrastructure" and ran into this
>>>>>>>> error when trying to run the command below, as 'grid' Unix account, to
>>>>>>>> bring up the OUI Installer via the VNCServer:
>>>>>>>> */media/sf_12cR1/grid/runInstaller*
>>>>>>>> . Where can I find the the location of the install log?
>>>>>>>> Hanh,
>>>>>>>>
>>>>>>>> [grid@collabn1 sf_12cR1]$ pwd
>>>>>>>> /media/sf_12cR1
>>>>>>>> [grid@collabn1 sf_12cR1]$ ls -l
>>>>>>>> total 4505916
>>>>>>>> -rwxrwxr-x 1 grid oinstall 22289857 Mar 22 10:38 1554900.zip
>>>>>>>> -rwxrwxr-x 1 grid oinstall 162046956 Mar 22 10:33
>>>>>>>> cvupack_Linux_x86_64.zip
>>>>>>>> -rwxrwxr-x 1 grid oinstall 591 Apr 16 23:50
>>>>>>>> cvuqdisk_install.sh
>>>>>>>> drwxrwxr-x 1 grid oinstall 4096 Apr 17 06:24 database
>>>>>>>> drwxrwxr-x 1 grid oinstall 4096 Apr 17 06:28 grid
>>>>>>>> -rwxrwxr-x 1 grid oinstall 0 Apr 16 23:50 keep
>>>>>>>> -rwxrwxr-x 1 grid oinstall 1361028723 Mar 22 09:40
>>>>>>>> linuxamd64_12c_database_1of2.zip
>>>>>>>> -rwxrwxr-x 1 grid oinstall 1116527103 Mar 22 02:35
>>>>>>>> linuxamd64_12c_database_2of2.zip
>>>>>>>> -rwxrwxr-x 1 grid oinstall 1750478910 Mar 22 08:59
>>>>>>>> linuxamd64_12c_grid_1of2.zip
>>>>>>>> -rwxrwxr-x 1 grid oinstall 201673595 Mar 22 00:18
>>>>>>>> linuxamd64_12c_grid_2of2.zip
>>>>>>>> -rwxrwxr-x 1 grid oinstall 173 Apr 16 23:50 readme.txt
>>>>>>>> -rwxrwxr-x 1 grid oinstall 478 Apr 16 23:50
>>>>>>>> sshUserSetup.expect
>>>>>>>> -rwxrwxr-x 1 grid oinstall 1243 Apr 16 23:50 sshUserSetup.sh
>>>>>>>> [grid@collabn1 sf_12cR1]$
>>>>>>>> [grid@collabn1 grid]$ */media/sf_12cR1/grid/runInstaller*
>>>>>>>> Starting Oracle Universal Installer...
>>>>>>>>
>>>>>>>> Checking Temp space: must be greater than 500 MB. Actual 23791 MB
>>>>>>>> Passed
>>>>>>>> Checking swap space: must be greater than 150 MB. Actual 7999 MB
>>>>>>>> Passed
>>>>>>>> Checking monitor: must be configured to display at least 256
>>>>>>>> colors. Actual 16777216 Passed
>>>>>>>> Preparing to launch Oracle Universal Installer from
>>>>>>>> /tmp/OraInstall2014-04-17_06-37-19AM. Please wait
>>>>>>>> ...[grid@collabn1grid]$ Exception in thread "main"
>>>>>>>> java.lang.NoClassDefFoundError:
>>>>>>>> oracle/install/ivw/db/driver/DBInstaller
>>>>>>>> Caused by: java.lang.ClassNotFoundException:
>>>>>>>> oracle.install.ivw.db.driver.DBInstaller
>>>>>>>> at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
>>>>>>>> at java.security.AccessController.doPrivileged(Native
>>>>>>>> Method)
>>>>>>>> at
>>>>>>>> java.net.URLClassLoader.findClass(URLClassLoader.java:190)
>>>>>>>> at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
>>>>>>>> at
>>>>>>>> sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
>>>>>>>> at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
>>>>>>>> Could not find the main class:
>>>>>>>> oracle.install.ivw.db.driver.DBInstaller. Program will exit.
>>>>>>>>
>>>>>>>> [grid@collabn1 grid]$
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Other related posts:
