Just curious to know if anyone has tried a steering damper on the Python and if so what are the pros and cons. Part of the reason for a steering damper is that I have a full areo body that the Python would fit into nicely instead of a SWB lowracer. I would have to attach the full streamliner fairing to the front OR the rear frame. Any thoughts on using a full body and if it would be better to mount the fairing to the front or rear frame ? Or is this just too crazy an idea? I just got my gas filled up on the new MIG welder so am itch'n to build. With my long 28 inch (71 cm) inseam a 26 inch wheel is out :} I would still like to keep a rear 26 inch wheel but will probably run a front 16 inch wheel. Anyone got any ideas for a starting point for steering angle with a 16/26 inch wheel set-up? Also seat heat? My size is 5'4" (1625mm) and 145 pounds (66 kg) Cheers, Paul Bell Crazy Canadian :} ============================================================ This is the Python Mailinglist at freelists.org Listmaster: Jürgen Mages jmages@xxxxxx To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field. ============================================================