[python] Re: Python trike upgrade to iLean ?

  • From: "Vi Vuong" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "vi_vuong" for DMARC)
  • To: python@xxxxxxxxxxxxx
  • Date: Sat, 27 Feb 2016 13:07:24 -0800

Paul

The small trike has a rubber door stop jammed between the frame and the 
chainring.
http://youtu.be/utaBjfLidhE

The tubes are wrapped both one loop around and over the axle (~half loop). Not 
sure which way is better because the tubes do stretch when friction is too 
high. 

The arm resistance idea didn't get too far but maybe you can come up with some 
mechanism with available parts.  
http://youtu.be/0yqIM4sj-GI

Vi

Manual-correction: It defends on the level OF resistance to leaning. 

On Feb 27, 2016, at 9:09 AM, paul needham <paul.2.needham@xxxxxxxxx> wrote:

Vi

Thanks for your prompt reply.

I think I have seen somewhere ' resistance ' is a inner tube tied between the 
frame and the crank the wheel is mounted on ?

One wrap or two ? one arm or both arms ?

regards Paul 

On 27/02/16 16:50, Vi Vuong (Redacted sender vi_vuong for DMARC) wrote:
Hi Paul,

It defends on the level is resistance to leaning.  My cargo trike has most 
resistance but still feel more like a bike.  See http://youtu.be/WIA2yH1JoJQ

I have thought of adding resistance by arms since they don't have much to 
do... :)

Cheers,

Vi

On Feb 27, 2016, at 8:33 AM, Paul Needham <paul.2.needham@xxxxxxxxx> wrote:

Hi all

I have ridden 2500 miles now on my Python trike , however I have no 
experience of a Python in bike mode.

The trike ride is very jiggly and hard due to the short wheelbase and being 
sat almost over the rear axle.

I wondered if I replaced the solid rear axle with a iLean rear end with a 
33" track same as my current trike  [ similar to the cargo trike ] would it 
ride                 similar to my existing trike with added suspension 
effect and leaning ?

Or would it be more akin to riding a Python bike , which means learning to 
ride it ?

regards Paul

============================================================ This is the 
Python Mailinglist //www.freelists.org/list/python Listmaster: Jurgen ;
Mages jmages@xxxxxx To unsubscribe send an empty mail to 
python-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field. 
============================================================

Other related posts: