Hi Juergen, Hi Joao,
Jürgen Mages schrieb:
If you want to use 30x30 for the front frame you might run into
several problems:
- front frame gets too heavy
- front frame gets too wide -> collision with heels and cranks
- collision with chainwheel
- ...
Are you sure that you cannot get at least 30x20 in your town?
I have to admit i didn?t surched every dealer of metal for 30/40 x 10. I
was lazy and went to a DIY-Market (Praktiker). ;-)
I have a problem with the 25x25 Tubes indeed: The Front-Frame is too
wide at the SBB. But I think collisions with heels, cranks or chainwheel
won?t appear. I?ll see if i?m right when i fix all peaces together for
the first time.
40x10 seems best to me but minimum order is 6 m
30x10 could be too weak, especially for you
Did i mention my wheigt anytime ? %(
OK you have dicovered my photo on my website ...
30x20 was the material for my P1 and I had to make lots of cuts
in the drivetrain region.
Try to keep the front frame as narrow as possible.
Yes you?re right.
I planned 26"-Wheels although i have long legs. So i get some more space
between BB / SBB and the tyre.
So my plan, reality shows that i need more space at the BB. So i got
problems at the SBB, which is more narrow because its "upright" position
in addition. Some more cuttings have to be made there !
Viel Glück,
Jürgen.
Thanks, i will need it (especially for welding).
PS: I recently updated some chapters on my construction page.
Thanks from me, Stephan
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
