>-- Originalt brev -- >From: "Torben Scheel" <torben_scheel@xxxxxxxxxxx> >To: <python@xxxxxxxxxxxxx> >Subject: [python] Danish Python pic's >Date: Sun, 13 Jun 2004 12:08:24 +0200 >Reply-To: python@xxxxxxxxxxxxx > > >I have allmost finished the frame, and managed to shoot some pictures yesterday >: http://www.scheel.net/HPV/Python/default.asp > >Don't mind the volapyk - It's Danish :-) I'll translate when I find the time. > >Angle is supposed to be 65 degrees, I'm not sure I'm there, but It's not >difficult to change the rear frame's bend a little. Axle to axle is 131cm. > >I'm not sure the single tube under the seat is strong enough, so I'm thinking >of building a set of tubes from the linkage -> under the seat -> supports >dovn to the rear fork. A vertical support from the center tube to the seat's >upper mouting is needed anyway, but I'm not going to add weight to it until >after the first few testrides. > >I'm really looking forward to the testrides now. Band Aid is ready ;-) > >Cheers, >Torben Hej, det ser sgu interesant ud, Torben.... Jeg er ikke selv kommet rigtigt igang endnu, overvejer hvordan ejg selv kan sætte præg på kontruktionen, der er jo forskellige muligheder... Hvor meget koster sådan et flevo-center-aksel og hvorfra skaffer man det? Jan ________________________________________ Få din egen webmail på http://www.sol.dk - gratis og med dig overalt! Vind en tur til Bhutan: http://tinyurl.com/2taq8 ============================================================ This is the Python Mailinglist at freelists.org Listmaster: Juergen Mages jmages@xxxxxx ============================================================