[pure-silver] Re: PROCESSING TANK FOR 70 MM FILM REEL

  • From: "Mark Sampson" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "msampson45" for DMARC)
  • To: pure-silver@xxxxxxxxxxxxx
  • Date: Mon, 15 Jun 2020 16:28:15 -0700

I assume your reel is for processing the 15’ length of 70mm, as loaded into 
cassettes for the Hasselblad, Linhof, and Graflex 70mm backs. I had a couple of 
tanks like you want when I was at Kodak, but never needed them, long gone of 
course. I did check the size of the Nikor tank I use for 4x5 sheets- while 
larger than the usual roll film tanks, it’s still too small for you needs. “It 
was a great idea, it just didn’t work.”
Mark S

Sent from my iPhone

On Jun 15, 2020, at 1:18 PM, ROBERT KISS <bobkiss@xxxxxxxxxxxxx> wrote:


DEAR LIST,

     It is a few years later so I thought I would try again to find a tank, 
preferably stainless steel, for the 70mm film real I own.  It is NOT the same 
as a 120 tank!  It is bigger!  The size is 6 3/4 in diameter and 3 in high so 
the tank would have to have open space larger than these dimensions.  

     I believe Kindermann and Nikkor made these but, as you can imagine, 
there were small production runs as not many normal photogs used 70mm.  
Sooooooooooooooooooooooooo...

     I am hoping someone might have an old one tucked away somewhere or know 
someone who does and who would like to sell it.  If they have a tank and reel 
set, I would buy both just to get the tank!  Never hurts to have two reels, 
right?  LOL!!!

     In the past Richard let me post some attached jpegs but I think the list 
automatically removes attachments now.  If you have info, please email me off 
list and I can send you the jpegs to help.

                               CHEERS!

                                           BOB

<mime-attachment.jpg>

Other related posts: