[pure-silver] Re: OFF TOPIC BUT TANGENTIALLY RELATED

  • From: "BOB KISS" <dmarc-noreply@xxxxxxxxxxxxx> ("bobkiss")
  • To: <pure-silver@xxxxxxxxxxxxx>
  • Date: Thu, 14 Oct 2021 15:32:02 -0400

Thanks, Gary!
 
From: pure-silver-bounce@xxxxxxxxxxxxx
[mailto:pure-silver-bounce@xxxxxxxxxxxxx] On Behalf Of Garry ;.
Sent: Thursday, October 14, 2021 3:01 PM
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] Re: OFF TOPIC BUT TANGENTIALLY RELATED
 
I know beginning with the rf603, they started to use a component which
allowed safety up to 300volts. I've taken mine apart and confirmed this.
They continued with this in the rf605 and I think that is why they no longer
list this as a spec. I've used the rf605 with a 175volt sync voltage. You
should have no problems.
  _____  

From: pure-silver-bounce@xxxxxxxxxxxxx <pure-silver-bounce@xxxxxxxxxxxxx> on
behalf of BOB KISS <dmarc-noreply@xxxxxxxxxxxxx>
Sent: Thursday, October 14, 2021 2:44 PM
To: pure-silver@xxxxxxxxxxxxx <pure-silver@xxxxxxxxxxxxx>
Subject: [pure-silver] OFF TOPIC BUT TANGENTIALLY RELATED 
 
DEAR LIST,
            This is off topic but I bet someone here can help me.  I have
various Dynalite strobe packs which show synch voltages from 8 to 15 volts.
I also have some Yongnuo RF605 radio synchs which I often use with my
smaller flash units.  I have searched the Yongnuo manual and Googled the
question but I can't seem to get an ACCURATE answer as to what is the
maximum synch voltage the RF605 synchs can handle without frying.  
            Does ANYONE on this list have a definite answer to this question
or can they refer me to an authoritative source to find the answer?  
            And, yes, I will use the strobes and synchs to shoot film half
the time and digital the other half so it is tangentially or partially a
pure silver question!  LOL!!!
                                               CHEERS!
                                                            BOB
 
Bob Kiss MGM Logo low res CROPPED email signature
 

JPEG image

Other related posts: