I test mine by dropping a piece of exposed film into it and agitating. If
the film clears in a minute or less, that seems like a pretty good
indicator that the fixer is still good.
Robin
On Fri, May 6, 2016 at 5:29 PM, Tim Daneliuk <tundra@xxxxxxxxxxxxxx> wrote:
I happened to look at the current pricing for the PF Hypo-Test kit, I see
they are asking nearly $23 for this on Freestyle... this seems unreasonably
high. Moreover, they claim that it will not work with prints processed
with hypo eliminator, because it contains ammonium. Well ... so does
Ilford
Rapid Fixer ... which I do use.
So, is there a reasonable, cheap alternative for hypo testing for prints
processed with an ammonium-based fixer?
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.
