The WB5CON is now updated to the new 0.6 server software. Fldigi is updated to 2.10.1.
Scheduled speed shifting is now implemented as follows: minute 0 - PSK63 minute 1 - PSK128 minute 2 - PSK250 minute 3 - PSK250 minute 4 - PSK250This repeats on a five minute cycle. The server time is set via ntp but seems about 2 seconds off. I'll fix that.
Also, there are now 3 beacons each hour as follows: top of the hour - PSK63 one minute past - PSK128 two minutes past - PSK250This is all on 10148kHz (10147 USB on your radio, if fldigi is set to 1000 Hz.).
I do not have the radio interfaced to hamlib so traffic frequency is not implemented.
I did update my client laptop to 0.7 client and easily manipulated the server speed from the client both up and down. Timing seemed a bit off (collisions) when using PSK63 but PSK128 and PSK250 worked well.
73, Fred WB5CON