[pskmail] Re: Upgrated server version
- From: John Douyere <vk2eta@xxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Thu, 20 Oct 2011 14:30:13 +1100
Hi Robert,
I hope we don't have to get you out of jail. Bail can be expensive..hihi
The latest server is on www.pskmail.org, in the stable part of the download
section.
Here is the direct link for the download:
http://www.pskmail.org/downloads/pskmail_server-1.4.12.tar.gz
Your configuration file looks good.
I have tried you table and I get the same issue with 1.4.12.
I am looking at the code right now and there is an issue with PSK250 not
being in the table of allowable modes. Maybe it has not switched to the
alternate table..I need to do some more forensic work, but I am getting
there. Bear with me...
73, John
On Thu, Oct 20, 2011 at 1:23 PM, Robert Krasowski <rkrasowski@xxxxxxxxx>wrote:
> Hi ,
> I upgraded my server today and here are some issue:
>
> 1. Which is the latest server version ?? where is it?? The latest I was
> able to find is 1.4.6 is that the correct one??
>
> 2. I updated my freq.txt to new one that reflect 24h schedule for
> frequencies to this:
>
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000, 10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
> PSK250,PSK250,PSK250,PSK250,PSK250,
> USB,USB,USB,USB,USB,
> KB2PNM,KB2PNM,KB2PNM,KB2PNM,KB2PNM,
>
> Now when I am scanning frequency change the way it should but my mode is
> PSK500R, hmm, any way to correct this??
> In pskmailrc.pl my default is PSK250 as well.
>
> So for now I am scanning in illegal mode, If you hear nothing from me
> within next few days that will indicate that I was arrested..... hi hi
>
> Robert
> KB2PNM
>
> PS: This is what I see in terminal :
>
> ### Server v. Pskmail_server 1.4.6. (C) 2011 PA0R
> 02:11 UTC Oct-20-2011: Program start
> 02:11 UTC Oct-20-2011: Connected to netherlands.aprs2.net port 1314
> POS=35N:079W
> Outside BigEar geo area...
> BigEar serverport:10148
> BigEar not available
> Scanning: 10148000,10148000,10148000,14111000,14111000,
> Offset = 0 minute(s)
> 02:11 UTC Oct-20-2011:
> Listening to the radio
> initialized
> I: ParseMode: ARQ new modem set to PSK500R
> 10148000,10148000,10148000,14111000,14111000,
> 10148000,10148000,10148000,14111000,14111000,
>
> 02:12 UTC Oct-20-2011:
> Send>APRS-IS:KB2PNM>PSKAPR:@200212z3543.59NP07948.71W&PSKmail 1.4.6
> Server & BoatLink 10.148MHz & 14.111MHz
>
> I: ParseMode: ARQ new modem set to PSK500R
> 02:13 UTC Oct-20-2011: Sending beacon
> Message_out:
> 00uKB2PNM:26 !3543.59NP07948.71W&D00B
> -
> I: ParseMode: ARQ new modem set to PSK500R
> I: ParseMode: ARQ new modem set to PSK500R
> I: ParseMode: ARQ new modem set to PSK500R
> I: ParseMode: ARQ new modem set to PSK500R
> I: ParseMode: ARQ new modem set to PSK500R
> 02:20 UTC Oct-20-2011: Sending beacon
> Message_out:
> 00uKB2PNM:26 !3543.59NP07948.71W&D00B
> -
> I: ParseMode: ARQ new modem set to PSK500R
> I: ParseMode: ARQ new modem set to PSK500R
> I: ParseMode: ARQ new modem set to PSK500R
>
>
>
>
>
>
Other related posts:
