If the client is too fast it is easy to use a 'preamble' on the client... But I just watched a connection from Franco, and SM0RWO received all statuses correctly.. ... unfortunately Franco did not hear very well... Rein PA0R >Right, correct of course. It only feels like the client transmission is >very, very quick. > >Another issue I have had is that the server refuses to accept new >connect requests after a successfully terminated session (a few minutes >after it). Connect frame is received without error but nothing happens. >I'll try to debug that when I next see it. > >73! > >sön 2011-01-09 klockan 11:48 +0100 skrev Rein Couperus: >> OK... well, the client only sends RSID when NOT connected. >> In connected mode the server controls the mode, so client TXID is off >> during connect... >> >> What can happen is that the client does not receive the status from the >> server, >> so it does not know it has to change modes. >> >> Rein PA0R >> >> >sön 2011-01-09 klockan 10:27 +0100 skrev Rein Couperus: >> >> If your server is too early in answering, you could >> >> increase the $Txdelay = 0; in the pskmailrc.pl config file. >> >> >> >> It is of course better to run an earlier version of fldigi (I use >> >> 3.20.20). >> >> I will ask Dave to change... >> >> >> >> Rein PA0R >> >> >> > >> >At the moment the issue I am having is that the client answers too soon >> >and the server does not hear the client rsid. I think we need to tweak >> >the client timing too. >> > >> >73 de Per >> > >> > >> > > > >