[pskmail] Re: Server's timeouts at connect time (V1.4.14)

  • From: "Rein Couperus" <rein@xxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Thu, 15 Dec 2011 09:39:06 +0100 (CET)

Hi John, I will do some checking today... the server uses 0x06 from fldigi to check when TX 
has stopped. 


Rein, Per,
During my testing for the Beta release of AndPskmail I have found that if I request a slow TX mode for the server AND it misses the first exchange then the resulting modes downgrades always results in the connect to fail.
In closer examination the reason is that the timeout count starts from when the response frame from the server is queued in Fldigi and not when is has finished being sent by Fldigi.
Therefore the available time before timeout is a combination of both the speed of the server's TX as well as the wait for the client's response, when it should be exclusively the second one only.
Is there a variable that reflects the end of TX so that the timeout count can start at the right time?
Version tested is 1.4.14.
73, John 

Other related posts: