[pskmail] Re: SV: Re: SV: Re: SV: Re: Ping

  • From: G6CKR <radio@xxxxxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Sun, 06 Mar 2011 11:29:00 +0000

go 10146.1 first a .2 jump will be too far. the .1 might be as well
You can make small changes in fldigi under sound card TX off set 1Hz at a time add - for lower just the number for higher. But you are close enough to wait for a few more opinions before you do anything.
73 Roger


On 06/03/2011 11:19, Gunnar Bulukin wrote:
Ok Roger, I will change down to 10146,0 from 10146,02 please inform me if
there is an improvement.
If you have the time can you send me a mail via my mail gate.
73 de Gunnar

-----Ursprungligt meddelande-----
Från: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] För
Roger G6CKR
Skickat: den 6 mars 2011 11:29
Till: pskmail@xxxxxxxxxxxxx
Ämne: [pskmail] Re: SV: Re: SV: Re: Ping

Done and it works.
First connect failed.
Second was OK.
Server update seemed to go through but I did not get a message back the
first time.
After the "don't know how " message the second update was acknowledged OK
and a mail check worked.
As there was not mail (as expected) I downloaded the Fleet codes.
There were some repeats but not enough to cause a mode change.

Final observation, you TX may be a few Hz HF still, compared to SM0RWO but
it is not far.
73 Roger
G6CKR
On Sun, 2011-03-06 at 08:43 +0100, Gunnar Bulukin wrote:
Hi Roger,

As you are running a client could you test if you can use my mailgate?

73 de Gunnar

-----Ursprungligt meddelande-----
Från: pskmail-bounce@xxxxxxxxxxxxx
[mailto:pskmail-bounce@xxxxxxxxxxxxx] För G6CKR
Skickat: den 5 mars 2011 18:14
Till: pskmail@xxxxxxxxxxxxx
Ämne: [pskmail] Re: SV: Re: Ping

So if we change the tx setting from 10146.1 to 10146.0 that should get
you to within 20 Hz I think.
if I'm right you will actually be 20 Hz low which you can add to the
Fldigi sound card TX off set.
But do it a step at a time.
look forward to gating you....... Just checked and I have gated you at
17:02
73 Roger.

On 05/03/2011 17:01, Rein Couperus wrote:
Hej Gunnar,

your server is working, but the TX is 80 Hz too high in frequency...

I got a connect, but 80 Hz difference is really too much....

Pse check with a second receiver, and take IS0GRB-3 as a reference
frequency...
Tnx,

Rein EA/PA0R/M

Hi Rein,

With some excellent help from Pär I thing that it is working now.
We changed the BFO from 600>   900 and TX from 10146,2>   10146,1 USB.
Now I am getting beacon from G6CKR with no problems.
Maybee now someone can ping me and test if it is working.
Pär told me that there is a program to test the mailfunktion but it
was not on the server cd. Can you tell me how to get it?
73 de gunnar

-----Ursprungligt meddelande-----
Från: pskmail-bounce@xxxxxxxxxxxxx
[mailto:pskmail-bounce@xxxxxxxxxxxxx] För Rein Couperus
Skickat: den 5 mars 2011 11:51
Till: pskmail@xxxxxxxxxxxxx
Ämne: [pskmail] Re: Ping


Hi Gunnar, I have not been able to hear the server yet, but condx
are not good at the moment between us... this what is in my list
this
morning:
09:01 - SM0RWO>PSKAPR,TCPIP*:!5901.16NP01756.10E&
09:02 - IS0GRB-3>PSKAPR,TCPIP*:!3914.79NP00910.96E&
10:02 - IS0GRB-3>PSKAPR,TCPIP*:!3914.79NP00910.96E&
11:02 - IS0GRB-3>PSKAPR,TCPIP*:!3914.79NP00910.96E&

You can see not even SM0RWO makes it into the Igate at the moment...
IS0GRB-3 is booming in here...

Rein EA/PA0R/M

=====================================================
Hi,

Has anyone been able  to hear or ping SA6BQZ?
TX10146,2 USB  RX10147 CW-N

73 de  gunnar

KB Vågspel
[www.vagspel.se]
Gunnar Bulukin
Tel +46(0)31 962130
Mob +46(0)31 7601501
SMS +46(0)705 933051

This message has been scanned  by Avast for Microsoft Outlook P
Please consider your environmental responsibility. Before printing
this  e-mail ask
yourself:- "Do I need a hard copy?"









Other related posts: