Hello! I am process of setting up a VHF pskmail server in the Atlanta, GA area. I found this mailing list yesterday, and I have already learned a good bit from reading through the archives. However, I have a few questions that I have not been able to resolve, and wondered if someone could give me a suggestion as to where to start to understand and resolve a few things. First of all the server is running, and we have been able to send email from the client to the internet via the server. However, after a successful connection and email exchange it starts cycling through the modes as if it isn't getting the ACKs that it expects to see back. Sometimes this last for two or more minutes. Sometimes it stays on PSK250R or moves to PSK500R, and sometimes it drops to one of the slow modes. Here is my environment: Server Lastest stable release of Ubuntu FLDIGI 3.21.13 pskmail_server-1.5.0 ICOM-2820H with Signalink USB Client Windows 7 Fldigi 3.21.38 jpskmail 1.5.5 Yaeus FT-8800 with Signalink USB On both the client and server I have Misc/Pskmail set to 1000Hz Carrier frequency, 10Hz Search Range, 9dB Acq S/N, 10Hz AFC range, and Reset to Carrier and Report ARQ are both checked. Should TxID, RxID, or AFC be enabled in fldigi? Both Signalinks are set up with Tx about 8 o'clock and Rx at 12 o'clock. Following is output from the pskmail server while it is doing this. At this point it attempted to send an email and failed with a "wrong password" message and then successful sent that message with no changes to anything. Client's rx s2n: 100 , averaged: 95.6104252400549 TX=PSK500R , RX=PSK500 , T=0 LQ=0 BL=6 Up-speed to TX:PSK500 , RX: PSK500 23:46 UTC Feb-24-2012: > Status : last=3 good=4 end=4 missing= Server's rx s2n: 100 , averaged: 66.6666666666667 Client's rx s2n: 81.1111111111111 , averaged: 60.3703703703704 TX=PSK500 , RX=PSK500 , T=0 LQ=0 BL=5 23:46 UTC Feb-24-2012: > Status : last=3 good=4 end=4 missing= Server's rx s2n: 98.9 , averaged: 77.4111111111111 Client's rx s2n: 80 , averaged: 66.9135802469136 TX=PSK500 , RX=PSK500 , T=0 LQ=2 BL=6 23:46 UTC Feb-24-2012: > Status : last=3 good=4 end=4 missing= Server's rx s2n: 99 , averaged: 84.6074074074074 Client's rx s2n: 80 , averaged: 71.2757201646091 TX=PSK500 , RX=PSK500 , T=0 LQ=0 BL=6 23:47 UTC Feb-24-2012: > Status : last=3 good=4 end=4 missing= Server's rx s2n: 98.9 , averaged: 89.3716049382716 Upgrading RX speed Client's rx s2n: 78.8888888888889 , averaged: 73.8134430727023 TX=PSK500 , RX=PSK500 , T=0 LQ=0 BL=6 WX7L-1->WX7L 23:47 UTC Feb-24-2012: > Status : last=3 good=4 end=4 missing= Server's rx s2n: 99 , averaged: 66.3333333333333 Client's rx s2n: 78.8888888888889 , averaged: 75.5052583447645 TX=PSK500 , RX=PSK500 , T=0 LQ=0 BL=6 23:47 UTC Feb-24-2012: > Status : last=3 good=4 end=4 missing= Server's rx s2n: 98.8 , averaged: 77.1555555555556 Client's rx s2n: 78.8888888888889 , averaged: 76.633135192806 TX=PSK500 , RX=PSK500 , T=0 LQ=0 BL=6 23:47 UTC Feb-24-2012: > Status : last=3 good=4 end=4 missing= Server's rx s2n: 98.8 , averaged: 84.3703703703704 Client's rx s2n: 78.8888888888889 , averaged: 77.3850530915003 TX=PSK500 , RX=PSK500 , T=0 LQ=0 BL=6 Disconnected 23:47 UTC Feb-24-2012: Listening to the radio At this point the client and server are both in listening mode. Regards, Dan KJ4ZZE