[pskmail] Re: IC-7200 coorection
- From: "Rein Couperus" <rein@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Mon, 16 May 2011 11:35:17 +0200 (CEST)
Sure you can... only thing to mind is that the .pskmail directory is used by
both
server and client, so make a copy of that directory before you switch to the
client.
You will also have to install java.
The client uses fldigi for rig control. But using the fldigi hamlib routines
that should work.
I have not tested that with the 7200, so you are on your own there :)
Rein PA0R
>Had your coffe now?;-)
>Can I not install a client on the same computer and configure it to run with
>the IC-7200. That way I can do some pings to test it, more like the real
>thing!! Btw is it the configuration that you wrote aboute before still
>working for clientmode on IC-7200 or are there any other ideas?
>
>//gunnar
>
>-----Original Message-----
>From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On
>Behalf Of Rein Couperus
>Sent: Monday, May 16, 2011 9:29 AM
>To: pskmail@xxxxxxxxxxxxx
>Subject: [pskmail] Re: IC-7200 coorection
>
>This one of those days...
>correction again:
>echo "test" > ~/.pskmail/pskdownload/bulletin
>
>sorry, should not answer my mail before drinking coffee...
>
>Rein
>
>>Correction, the command is called:
>>echo "test" > ~/.pskmail/pskmaildownload/bulletin
>>
>>Rein PA0R
>>
>>>For testing the server output you can use the broadcasting feature:
>>>
>>>write a small file ('checking server output +'), call it 'bulletin'
>>>and copy it to ~/.pskmail
>>>
>>>or the following in a terminal:
>>>
>>>echo "servertest" > ~/.pskmail/bulletin
>>>
>>>As soon as the server sees the file it will send it and erase it.
>>>
>>>The format will be:
>>>ZCZC
>>>QTC de SA6BQZ-1 16.05.2011
>>>servertest
>>>NNNN
>>>
>>>This is a quick way to check server output etc...
>>>
>>>Pse limit this way of testing to the minimum, so as not to disturb
>>>traffic too much, or do it on a free fequency :)
>>>
>>>73,
>>>
>>>Rein PA0R
>>>
>>>
>>>
>>>==================================================
>>>Hi,
>>>
>>>I seem to having some problems in getting out with my server.
>>>Notised one small "non feature"!
>>>When via pskmailrc.pl giving total controll to pskmail over the rig there
>is no way of doing quick tx test to see if power out is ok. Yes, I can of
>course stand by the rigg and check minute 4 every hour or wait intill
>pskmail is sending a qsl to someone but it is a bit unsecure when doing
>changes at the same time. It takes a bit of time so to say!!
>>>Is there a way of running a small script to do test while pskmail is
>running?
>>>
>>>73 de SA6BQZ Gunnar
>>>
>>
>
>
Other related posts:
