[pskmail] Re: Alpha JavaPskmailServer (combined client/server/igate/Radio Message). Alpha version 0.9.4.a23. + Android AndPskmail app

  • From: John Douyere <vk2eta@xxxxxxxxx>
  • To: Pskmail List <pskmail@xxxxxxxxxxxxx>
  • Date: Sun, 15 Aug 2021 20:34:20 +1000

Hello Juergen,

I dug into the code and did a test here and that is what I can see:

The igate and the server functions are separate at present.  This means that:

a. The Java mini-server is not reported on the Pskmail "network" using
the PSKAPR id that was there under the Perl server. This information
was used to build the list of servers and was displayed in the PSkmail
user map page of the website.

b. The mini-server does not report connections from clients, the
"Gating <callsign>" messages on APRS like the Perl server used to.
This information was used to build the list of clients and was
displayed in the PSkmail user map page of the website.

c. The igate will send packets to APRS only if you perform a beacon or
send an APRS message to another station.

Now regarding the "Show APRS-IS" checkbox. This enables the display of
any APRS packet from the APRS-IS network that contains the "PSKAPR"
string.
So what you saw in logical since the beacon from 9A3LI was sent via
DL8JF-2 and contained the "PSKAPR" string:
"9A3LI>PSKAPR,TCPIP*:!4601.17N/01632.90Ey000/000/jpskmail 1.8.7"

Rein's and Per's plan were to have a more integrated set of servers
hence these messages to maintain a dynamic picture of the Pskmail
network.

If we think this is important I can add these functions in the Java server.

All the best,

73, John (VK2ETA)

On Sun, 15 Aug 2021 at 18:50, Juergen <dl8jf@xxxxxxxxxxxx> wrote:


Hello John,
I've tried some other aprs2 servers but the result was the same.
If I remember right in the old pskmail server were two aprs beacons
active. First the server checked if an Internet connection was available
and if that was the case it sents an aprs beacon to an aprs2 server.
This was repeated at certain intervals. The second aprs beacon was sent
via radio repeated at certain intervals as well.

But the APRS-IS box seems to be working. I got the following message
from a connection with 9A3LI:

   17:34 - 9A3LI>PSKAPR,TCPIP*:!4601.17N/01632.90Ey000/000/jpskmail 1.8.7

The raw log of 9A3LI at aprs.fi shows:

" 2021-08-14 17:34:42 CEST:
9A3LI>PSKAPR,TCPIP*,qAS,DL8JF-2:!4601.17N/01632.90Ey000/000/jpskmail
1.8.7 "

73 Juergen


On 8/13/21 8:01 PM, John Douyere wrote:
Hello Juergen,

Thats great that you are testing the server.

The euro.aprs.net <http://euro.aprs.net> is not a real server. It is a
regional rotate address which points to a real APRS server. Have a look
at http://aprs2.net/ ;<http://aprs2.net/>.

I never paid much attention to the results of the "Show APRS-IS" being
ticked in the previous Java client.

Do you know what data would be displayed, and what action would result
(like transmission of the data or not)?

I am not in front of the computer, but you can provide an APRS server's
address directly. Not sure if you can type it in the windows directly or
if you need to edit the config file.

All the best,

73, John

On Fri, 13 Aug 2021, 22:46 Juergen, <dl8jf@xxxxxxxxxxxx
<mailto:dl8jf@xxxxxxxxxxxx>> wrote:

    Hi John,
    thanks for your good work. I've installed it and  the Mini Server is up
    and running now.
    In the Igate tab I've the status message " Connected to
    euro.aprs2.net <http://euro.aprs2.net>
    ", but the server is not visible at aprs.fi <http://aprs.fi>.
    I've also checked the "show APRS-IS" box but got no messages in the
    terminal window.

    I think I run the server for a while, so OMs please connect and test.

    Dial frequency 10.148 MHz, Mode: PSK500R, Grid locator:JO53, Call
    DL8JF-2

    73 Juergen ( DL8JF )




Other related posts: