That’s great – many thanks.
Best wishes.
Tim Burgess
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Yuma Decaux
Sent: 04 April 2016 09:57
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] Re: Reading errors in XCode
You will need to see them. Just press escape as each issue will pop up a fix
suggestion.
console is in the debug viewer. The combination is command-6 uninteract, vo
right till you hear "editor area", interact and right to end till you hear
debug, interact and right once . You will be in the console.
There's also a quick map key which I don't use that normally takes you straight
to the console but I'm not sure of the key combo.
There's probably another way which is to set a window spot where the console is
so you can nav to it with a shortcut of your choice through the voice over
utility.
Cheers,
On 4/04/2016, at 5:29 PM, Tim Burgess <tim@xxxxxxxxxxxxx
<mailto:tim@xxxxxxxxxxxxx> > wrote:
Hi
If I build my XCode 7 project and errors are encountered, they appear as a
table in the Issue Navigator. Each cell of the table can be an expandable item
which reveals the error information.
The problem that I’m hitting is that the error text goes beyond the right edge
of the window and I can’t figure out how to get VoiceOver to scroll to see more.
I’m told that a better approach would be to use the Log Navigator, but I can’t
find a keystroke to take me there on-demand and using VoiceOver navigation is
just too slow to satisfy the productivity requirements of my employer.
Can anybody offer any help, please?
Best wishes.
Tim Burgess
