The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#4007) Re: Problem - mail sent as nobody <http://www.phorm.com/support/?rev=4007> AUTHOR: Steve DATE: April 27, 2004 at 11:57 a.m. EST Reply To: (#3987) Re: Problem - mail sent as nobody Author: JShaffner Date: April 23, 2004 at 8:52 p.m. EST Nope... not the problem. Actually on my old 3.0.4 version... if left blank it shows up from the receiving address. On this form with the newest version, I require an e-mail address, but that doesn't matter. Everything that comes in comes from the "nobody" user. I also tried removing the rule requiring the e-mail. Still comes from nobody. > One problem that I have run into was that if they do > not enter an e-mail address then it will be sent from > Nobody. I get them once in a while. One possibility > you might consider is having it as a required field. > Jeff *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.