The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#2500) Re: Array not logging correctly <http://www.phorm.com/support/?rev=2500> AUTHOR: Patrick O'Hara DATE: April 10, 2003 at 8:25 p.m. EST Reply To: (#2499) Array not logging correctly Author: Rich Date: April 10, 2003 at 1:43 p.m. EST Hi Rich, You say that it works fine without DBFetch, and what you have provided backs that up, it looks as though it is doing what it should. However, you will need to tell me what you are trying to do with DBFetch in order for me tto assist. i.e. Include the DBFetch settings that you are using that returns the errors. Regards, Patrick O'Hara WhitsundayIT QLD, Australia patrick@xxxxxxxxxxxxxxxx www.whitsundayit.com *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.