I just added a used Hitachi Deskstar 80 gb hard drive to a Gateway computer with XP Home OS as a second drive. I set the original to master and the second one to slave. They had been cable select the first time I tried it. In device manager it says it is operating correctly, but I don't see the drive anywhere except there. Under volume it says it's not initialized when you bring up properties. I have to second drive at the end of the cable because it didn't work connected the other way. Any ideas to try? Rocky Fithian If GOD doesn't seem near, Who moved? http://web.sccoast.net/users/rockyfit/webpagelinks.htm Rolling Thunder SC3...Part Of It...Proud of it. http://www.rollingthundergrandstrand.com/SC3_HomePageMar07.html SC Patriot Guard...Part Of It...Proud of it. http://www.patriotguard.org/Home/tabid/53/Default.aspxhttp ========================= The list's FAQ's can be seen by sending an email to PCWorks-request@xxxxxxxxxxxxx with FAQ in the subject line. To unsubscribe, subscribe, set Digest or Vacation to on or off, go to //www.freelists.org/list/pcworks . You can also send an email to PCWorks-request@xxxxxxxxxxxxx with Unsubscribe in the subject line. Your member list settings can be found at //www.freelists.org/cgi-bin/lsg2.cgi/l=pcworks . Once logged in, you have access to numerous other email options. The list archives are located at //www.freelists.org/archives/pcworks/ . All email posted to the list will be placed there in the event anyone needs to look for previous posts. -zxdjhu-