[PCWorks] Detecting Slave Drive
- From: Tom <tjd@xxxxxxxxx>
- To: pcworks@xxxxxxxxxxxxx
- Date: Tue, 14 Jun 2011 14:54:44 -0400
I have an old Pentium II I'm playing around with. It does
not detect the slave drive on either of the IDE channels.
I've triple checked connectors and jumper settings.
Is there somewhere in the BIOS settings I can check?
Thanks,
Tom
=========================
The list's FAQ's can be seen by sending an email to
PCWorks-request@xxxxxxxxxxxxx with FAQ in the subject line.
To unsubscribe, subscribe, set Digest or Vacation to on or off, go to
//www.freelists.org/list/pcworks . You can also send an email to
PCWorks-request@xxxxxxxxxxxxx with Unsubscribe in the subject line. Your
member list settings can be found at
//www.freelists.org/cgi-bin/lsg2.cgi/l=pcworks . Once logged in, you have
access to numerous other email options.
The list archives are located at //www.freelists.org/archives/pcworks/ .
All email posted to the list will be placed there in the event anyone needs to
look for previous posts.
-zxdjhu-
Other related posts:
- » [PCWorks] Detecting Slave Drive - Tom
