Hi Jianliang, There is something definitely very wrong. 1. When you installed Overture did the check.p tests pass? 2. What version of gcc are you using and which fortran compiler? 3. Try running some cd examples directly, e.g. cgins examples in cg/ins/cmd 4. If these still fail, run an example in gdb to see where the failure occurs. ...Bill On 12/19/2012 01:11 AM, Jianliang Wang wrote:
Hi,everyone, I have installed the overture 2.5 on ubuntu 12.04 lts 64bit. then in cg directory , I inputcd cg2.5 make checkbut only some in ins and cns was success, and I don't understand the error report I install the overture 2.5 in 32bit system before and make check in cg , the same only part was success but the number of error is less than in this new insall. the report is following: ------------------------------------------------------------------------------ make[1]: Entering directory `/home/alljoyland/apps/cg.v25/ad/check' ln -sf ../../common/src/check.p . ./check.p -solver=cgad ================================================================================ This perl script will run regression tests (The lists of tests is in the file named 'tests') Usage: check.p [-test=testName] [-replace] [-check=<checkFileDirectory>] [-solver=name] [-verbose=<num>] -test=testName : name of a particular test to run (by default do all) -replace : replace check files with the new ones computed -verbose : verbose=0 : print very little, verbose=1 print more ============================================================================== program=CGBUILDPREFIX/ad/bin/cgad checkFile=ad.check Using program = /home/alljoyland/apps/cg.v25/ad/bin/cgad Using the executable: /home/alljoyland/apps/cg.v25/ad/bin/cgad running: /home/alljoyland/apps/cg.v25/ad/bin/cgad noplot ./sq.tz>! sq.tz.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ad/bin/cgad and generating sq.tz **** running: /home/alljoyland/apps/cg.v25/ad/bin/cgad noplot ./cic>! cic.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ad/bin/cgad and generating cic **** running: /home/alljoyland/apps/cg.v25/ad/bin/cgad noplot ./imp.tz>! imp.tz.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ad/bin/cgad and generating imp.tz **** ******************************************************** ************ cgad: There were 3 ERRORS **************** ******************************************************** make[1]: Leaving directory `/home/alljoyland/apps/cg.v25/ad/check' make[1]: Entering directory `/home/alljoyland/apps/cg.v25/asf/check' ln -sf ../../common/src/check.p . ./check.p -solver=cgasf ================================================================================ This perl script will run regression tests (The lists of tests is in the file named 'tests') Usage: check.p [-test=testName] [-replace] [-check=<checkFileDirectory>] [-solver=name] [-verbose=<num>] -test=testName : name of a particular test to run (by default do all) -replace : replace check files with the new ones computed -verbose : verbose=0 : print very little, verbose=1 print more ============================================================================== program=CGBUILDPREFIX/asf/bin/cgasf checkFile=asf.check Using program = /home/alljoyland/apps/cg.v25/asf/bin/cgasf Using the executable: /home/alljoyland/apps/cg.v25/asf/bin/cgasf running: /home/alljoyland/apps/cg.v25/asf/bin/cgasf noplot ./sinfoil! sinfoil.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/asf/bin/cgasf and generating sinfoil **** running: /home/alljoyland/apps/cg.v25/asf/bin/cgasf noplot ./sqtz>! sqtz.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/asf/bin/cgasf and generating sqtz **** ******************************************************** ************ cgasf: There were 2 ERRORS **************** ******************************************************** make[1]: Leaving directory `/home/alljoyland/apps/cg.v25/asf/check' make[1]: Entering directory `/home/alljoyland/apps/cg.v25/cns/check' ln -sf ../../common/src/check.p . ./check.p -solver=cgcns ================================================================================ This perl script will run regression tests (The lists of tests is in the file named 'tests') Usage: check.p [-test=testName] [-replace] [-check=<checkFileDirectory>] [-solver=name] [-verbose=<num>] -test=testName : name of a particular test to run (by default do all) -replace : replace check files with the new ones computed -verbose : verbose=0 : print very little, verbose=1 print more ============================================================================== program=CGBUILDPREFIX/cns/bin/cgcns checkFile=cns.check Using program = /home/alljoyland/apps/cg.v25/cns/bin/cgcns Using the executable: /home/alljoyland/apps/cg.v25/cns/bin/cgcns running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./../cmd/tz.cmd -g=square10 -tf=.1 -tp=.1 -go=go>! tzSquare.out *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating tzSquare **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./../cmd/tz.cmd -g=cic -tf=.1 -tp=.1 -go=go>! tzCic.out *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating tzCic **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./../cmd/tz.cmd -g=box10 -tf=.05 -tp=.05 -go=go>! tzBox.out *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating tzBox **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./../cmd/tz.cmd -g=sicFixede2.order2 -tf=.05 -tp=.05 -tz=trig -bc1=slip -bcOption=4 -go=go>! tzSicg.out *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating tzSicg **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./square.cns>! square.cns.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating square.cns **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./cicSubsonic>! cicSubsonic.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating cicSubsonic **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./shockTubeg>! shockTubeg.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating shockTubeg **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./cic.godunov>! cic.godunov.dp.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating cic.godunov.dp **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./detonationOneStepIdeal>! detonationOneStepIdeal.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating detonationOneStepIdeal **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./cicShockMove>! cicShockMove.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating cicShockMove **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./detonationMieGruneisen>! detonationMieGruneisen.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating detonationMieGruneisen **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./multi>! multi.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating multi **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./ignitionAndGrowth>! ignitionAndGrowth.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating ignitionAndGrowth **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./eulerAxisymmetric>! eulerAxisymmetric.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating eulerAxisymmetric **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./sqStrat_implicit>! sqStrat_implicit.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating sqStrat_implicit **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./sqStrat_newton>! sqStrat_newton.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating sqStrat_newton **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./square.mp>! square.mp.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating square.mp **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./mpTestV! mpTestV.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating mpTestV **** running: /home/alljoyland/apps/cg.v25/cns/bin/cgcns noplot ./fourComp! fourComp.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/cns/bin/cgcns and generating fourComp **** ******************************************************** ************ cgcns: There were 19 ERRORS **************** ******************************************************** make[1]: Leaving directory `/home/alljoyland/apps/cg.v25/cns/check' make[1]: Entering directory `/home/alljoyland/apps/cg.v25/ins/check' ln -sf ../../common/src/check.p . ./check.p -solver=cgins ================================================================================ This perl script will run regression tests (The lists of tests is in the file named 'tests') Usage: check.p [-test=testName] [-replace] [-check=<checkFileDirectory>] [-solver=name] [-verbose=<num>] -test=testName : name of a particular test to run (by default do all) -replace : replace check files with the new ones computed -verbose : verbose=0 : print very little, verbose=1 print more ============================================================================== program=CGBUILDPREFIX/ins/bin/cgins checkFile=ins.check Using program = /home/alljoyland/apps/cg.v25/ins/bin/cgins Using the executable: /home/alljoyland/apps/cg.v25/ins/bin/cgins running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./square.ins>! square.ins.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating square.ins **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./sis.ins! sis.ins.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating sis.ins **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./cic.ins! cic.ins.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating cic.ins **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./cilc.ins! cilc.ins.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating cilc.ins **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./cic.ss! cic.ss.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating cic.ss **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./hgrid>! hgrid.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating hgrid **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./cicMove! cicMove.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating cicMove **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=square10.order4 -degreex=4 -degreet=3 -ts=pc4 -useNewImp=0 -bcn=noSlip -bc1=inflow -bc2=outflow -tp=.05 -tf=.05 -go=go>! sq4e.out checkCheckFiles: files ins.check and sq4e.check agree at 2 times , maxDiff=1.50e-13, (tol=1.00e-05) ... "sq4e" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=box10.order4 -degreex=4 -degreet=3 -ts=pc4 -useNewImp=0 -bcn=noSlip -bc1=inflow -bc2=outflow -tp=.05 -tf=.05 -go=go>! box4e.out checkCheckFiles: files ins.check and box4e.check agree at 2 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "box4e" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=square10.order4 -degreex=4 -degreet=1 -ts=im -iv=oldViscous -bcn=noSlip -bc1=inflow -bc2=outflow -tp=.05 -tf=.05 -go=go>! sq4i.out checkCheckFiles: files ins.check and sq4i.check agree at 2 times , maxDiff=1.52e-13, (tol=1.00e-05) ... "sq4i" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=box10.order4 -degreex=4 -degreet=1 -ts=im -iv=oldViscous -bcn=noSlip -bc1=inflow -bc2=outflow -tp=.05 -tf=.05 -go=go>! box4i.out checkCheckFiles: files ins.check and box4i.check agree at 2 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "box4i" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/slider.cmd -g=slideri1.order2.hdf -nu=.05 -tf=.05 -tp=.025 -ts="adams PC" -tz=poly -degreex=1 -degreet=1 -vShift=5. -go=go>! slider.out checkCheckFiles: files ins.check and slider.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "slider" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/slider.cmd -g=slideri1.order2.hdf -nu=.05 -tf=.05 -tp=.025 -impGrids="all=implicit" -tz=poly -degreex=1 -degreet=1 -vShift=5. -go=go>! sliderImp.out checkCheckFiles: files ins.check and sliderImp.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "sliderImp" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/slider.cmd -g=slideri1.order2.hdf -nu=.05 -tf=.05 -tp=.025 -tz=poly -degreex=1 -degreet=1 -vShift=5. -go=go>! sliderSemiImp.out checkCheckFiles: files ins.check and sliderSemiImp.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "sliderSemiImp" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./box.ins! box.ins.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating box.ins **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./bib.ins! bib.ins.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating bib.ins **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./sib.ins! sib.ins.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating sib.ins **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./axisym.cmd -g=shortHalfCylinder.hdf -nu=.1 -tf=.2 -tp=.1 -model=ins -tz=trig -project=0 -go=go>! axisymINS.out checkCheckFiles: files ins.check and axisymINS.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "axisymINS" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./axisym.cmd -g=shortHalfCylinder.hdf -nu=.1 -tf=.2 -tp=.1 -model=boussinesq -tz=trig -project=0 -go=go>! axisymBous.out checkCheckFiles: files ins.check and axisymBous.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "axisymBous" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./axisym.cmd -g=shortHalfCylinder.hdf -nu=.1 -tf=.2 -tp=.1 -dtMax=.05 -model=boussinesq -tz=trig -project=0 -go=go -ts=implicit>! axisymBousImp.out checkCheckFiles: files ins.check and axisymBousImp.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "axisymBousImp" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -boxorder=4 -grid_order=4 -order=4 -g=ogen -gf=square --N=21 --nx=21 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=p --squarebc=periodic -bcn="*" -fx=2 -fy=2 -fz=2 -ft=2 -advectionCoefficient=1 -nu=0.1 -tf=.2 -go=run -tp=.1 -dtMax=.1 -do=compact>! tzAFS2Dp.out *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2Dp **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd --boxorder=4 -grid_order=4 -order=4 -g=ogen -gf=square --N=21 --nx=21 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=d --squarebc= -bcn="*" -fx=2 -fy=2 -fz=2 -ft=2 -advectionCoefficient=1 -nu=0.1 -tf=.2 -go=run -tp=.1 -dtMax=.1 -do=compact>! tzAFS2Dd.out *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2Dd **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd --grid_factor=2 --boxorder=4 -grid_order=4 -order=4 -g=ogen -gf=annulus --N=41 --nx=41 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=d --squarebc= -bcn="*" -fx=2 -fy=2 -fz=2 -ft=1 -advectionCoefficient=1 -nu=1e-2 -tf=.2 -go=run -tp=.1 -dtMax=.1 -do=compact>! tzAFS2Dd.annulus.out checkCheckFiles: files ins.check and tzAFS2Dd.annulus.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "tzAFS2Dd.annulus" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd --boxorder=4 -grid_order=4 -order=4 -g=ogen -gf=box --N=20 --nx=20 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=p --squarebc=periodic -bcn="*" -fx=2 -fy=2 -fz=2 -ft=2 -advectionCoefficient=1 -nu=0.1 -tf=.2 -go=run -tp=.1 -dtMax=.1 -do=compact -psolver=best>! tzAFS3Dp.out checkCheckFiles: files ins.check and tzAFS3Dp.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "tzAFS3Dp" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd --boxorder=4 -grid_order=4 -order=4 -g=ogen -gf=box --N=20 --nx=20 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=d --squarebc= -bcn="*" -fx=2 -fy=2 -fz=2 -ft=2 -advectionCoefficient=1 -nu=0.1 -tf=.2 -go=run -tp=.1 -dtMax=.1 -do=compact -psolver=best>! tzAFS3Dd.out checkCheckFiles: files ins.check and tzAFS3Dd.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "tzAFS3Dd" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd --grid_factor=1 --boxorder=4 -grid_order=4 -order=4 -g=ogen -gf=cylinder --N=11 --nx=11 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=d --squarebc= -bcn="*" -fx=2 -fy=2 -fz=2 -ft=1 -advectionCoefficient=1 -nu=1e-2 -tf=.1 -go=run -tp=.1 -dtMax=.1 -do=compact>! tzAFS3Dd.cylinder.out checkCheckFiles: files ins.check and tzAFS3Dd.cylinder.check agree at 2 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "tzAFS3Dd.cylinder" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd --boxorder=4 -grid_order=4 -order=2 -g=ogen -gf=box --N=20 --nx=20 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=d --squarebc= -bcn="*" -fx=2 -fy=2 -fz=2 -ft=2 -advectionCoefficient=1 -nu=0.01 -tf=.2 -go=run -tp=.1 -dtMax=.1 -do=compact -psolver=best -model=boussinesq -kThermal=.01>! tzAFS3DdBous.out checkCheckFiles: files ins.check and tzAFS3DdBous.check agree at 3 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "tzAFS3DdBous" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd --grid_factor=1 --boxorder=4 -grid_order=4 -order=2 -g=ogen -gf=cylinder --N=11 --nx=11 -degreex=1 -degreet=0 -ts=afs -tz=trig -newts=1 -debug=0 --boxbc=d --squarebc= -bcn="*" -fx=2 -fy=2 -fz=2 -ft=1 -advectionCoefficient=1 -nu=1e-2 -tf=.1 -go=run -tp=.1 -dtMax=.1 -do=compact -model=boussinesq -kThermal=.01>! tzAFS3DdBous.cylinder.out checkCheckFiles: files ins.check and tzAFS3DdBous.cylinder.check agree at 2 times , maxDiff=0.00e+00, (tol=1.00e-05) ... "tzAFS3DdBous.cylinder" appears to be correct running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=cic.4 -nu=1e-2 -tf=.1 -dtMax=0.02 -model=ins -ts=afs -go=run -tz=trig>! tzAFS2Dd.cic.4.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2Dd.cic.4 **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=cic.4 -nu=1e-2 -tf=.1 -dtMax=0.02 -model=boussinesq -ts=afs -go=run -tz=trig>! tzAFS2DdBous.cic.4.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2DdBous.cic.4 **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=cic -nu=1e-2 -tf=.1 -dtMax=0.02 -model=ins -ts=afs -go=run -tz=trig -move=shift -gridToMove=Annulus>! tzAFS2Dd.cic.move.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2Dd.cic.move **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=cic -nu=1e-2 -tf=.1 -dtMax=0.02 -model=boussinesq -ts=afs -go=run -tz=trig -move=shift -gridToMove=Annulus>! tzAFS2DdBous.cic.move.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2DdBous.cic.move **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=cic -bcn="all=noSlipWall" -nu=1e-2 -tf=.1 -dtMax=0.02 -model=ins -ts=afs -go=run -tz=trig -move=shift -gridToMove=Annulus>! tzAFS2DnoSlip.cic.move.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2DnoSlip.cic.move **** running: /home/alljoyland/apps/cg.v25/ins/bin/cgins noplot ./../cmd/tz.cmd -g=cic -nu=1e-2 -tf=.2 -dtMax=0.01 -model=ins -ts=afs -go=run -tz=trig -bcn=penaltySlip -bc1="square(0,0)=noSlipWall" -bc2="square(1,0)=noSlipWall">! tzAFS2Dpenalty.cic.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/ins/bin/cgins and generating tzAFS2Dpenalty.cic **** ******************************************************** ************ cgins: There were 18 ERRORS **************** ******************************************************** make[1]: Leaving directory `/home/alljoyland/apps/cg.v25/ins/check' make[1]: Entering directory `/home/alljoyland/apps/cg.v25/sm/check' ln -sf ../../common/src/check.p . ./check.p -solver=cgsm ================================================================================ This perl script will run regression tests (The lists of tests is in the file named 'tests') Usage: check.p [-test=testName] [-replace] [-check=<checkFileDirectory>] [-solver=name] [-verbose=<num>] -test=testName : name of a particular test to run (by default do all) -replace : replace check files with the new ones computed -verbose : verbose=0 : print very little, verbose=1 print more ============================================================================== program=CGBUILDPREFIX/sm/bin/cgsm checkFile=sm.check Using program = /home/alljoyland/apps/cg.v25/sm/bin/cgsm Using the executable: /home/alljoyland/apps/cg.v25/sm/bin/cgsm running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./tz>! tz.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tz **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./cic>! cic.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating cic **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -pv=nc -g=sib -degreex=2 -degreet=2 -tf=.1 -tp=.1 -go=go>! tzSibnc.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tzSibnc **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -pv=nc -g=sib -degreex=2 -degreet=2 -tf=.05 -tp=.05 -bcn=sf -go=go>! tzSibSFnc.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tzSibSFnc **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./cicc>! cicc.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating cicc **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -pv=c -g=sib -degreex=2 -degreet=2 -tf=.05 -tp=.05 -go=go>! tzSibc.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tzSibc **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -pv=c -g=sib -degreex=2 -degreet=2 -tf=.05 -tp=.05 -bcn=sf -go=go>! tzSibSFc.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tzSibSFc **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -pv=g -g=sis -degreex=1 -degreet=1 -tf=.2 -tp=.1 -go=go>! tzSqg.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tzSqg **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -g=cic -pv=g -tz=trig -tf=.05 -tp=.05 -go=go>! cicg.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating cicg **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -g=cic -pv=g -tz=trig -tf=.05 -tp=.05 -bcn=sf -go=go! cicSFg.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating cicSFg **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -pv=g -g=sib -degreex=2 -degreet=2 -tf=.05 -tp=.05 -go=go>! tzSibg.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tzSibg **** running: /home/alljoyland/apps/cg.v25/sm/bin/cgsm noplot ./../cmd/tz.cmd -pv=g -g=sib -degreex=2 -degreet=2 -tf=.05 -tp=.05 -bcn=sf -go=go>! tzSibSFg.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/sm/bin/cgsm and generating tzSibSFg **** ******************************************************** ************ cgsm: There were 12 ERRORS **************** ******************************************************** make[1]: Leaving directory `/home/alljoyland/apps/cg.v25/sm/check' make[1]: Entering directory `/home/alljoyland/apps/cg.v25/mp/check' ln -sf ../cmd/adDomain.h . ln -sf ../cmd/cnsDomain.h . ln -sf ../cmd/insDomain.h . ln -sf ../cmd/smDomain.h . ln -sf ../../common/src/check.p . ./check.p -solver=cgmp ================================================================================ This perl script will run regression tests (The lists of tests is in the file named 'tests') Usage: check.p [-test=testName] [-replace] [-check=<checkFileDirectory>] [-solver=name] [-verbose=<num>] -test=testName : name of a particular test to run (by default do all) -replace : replace check files with the new ones computed -verbose : verbose=0 : print very little, verbose=1 print more ============================================================================== program=CGBUILDPREFIX/mp/bin/cgmp checkFile=mp.check Using program = /home/alljoyland/apps/cg.v25/mp/bin/cgmp Using the executable: /home/alljoyland/apps/cg.v25/mp/bin/cgmp running: /home/alljoyland/apps/cg.v25/mp/bin/cgmp noplot ./aaTwoSquare>! aaTwoSquare.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/mp/bin/cgmp and generating aaTwoSquare **** running: /home/alljoyland/apps/cg.v25/mp/bin/cgmp noplot ./aaTwoBox! aaTwoBox.outAbort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/mp/bin/cgmp and generating aaTwoBox **** running: /home/alljoyland/apps/cg.v25/mp/bin/cgmp noplot ./iaTwoSquare>! iaTwoSquare.out Abort (core dumped) *** There was an error running /home/alljoyland/apps/cg.v25/mp/bin/cgmp and generating iaTwoSquare **** running: /home/alljoyland/apps/cg.v25/mp/bin/cgmp noplot ./../cmd/twoDomain.cmd -g=twoSquaresInterfacee1.order2.hdf -kappa1=1. -ktc1=1. -kappa2=.1 -ktc2=.1 -tf=.1 -tp=.05 -ts=pc -coupled=1 -tz=poly -degreet1=2 -degreet2=2 -debug=1 -method2=ins -go=go>! twoSquareAdInsExp.out *** There was an error running /home/alljoyland/apps/cg.v25/mp/bin/cgmp and generating twoSquareAdInsExp **** running: /home/alljoyland/apps/cg.v25/mp/bin/cgmp noplot ./../cmd/twoDomain.cmd -g=twoSquaresInterfacee1.order2.hdf -kappa1=1. -ktc1=1. -kappa2=.1 -ktc2=.1 -tf=.1 -tp=.02 -dtMax=.02 -ts=im -nc=5 -coupled=0 -tz=poly -degreet1=2 -degreet2=2 -iTol=1.e-9 -debug=1 -method2=ins -go=go>! twoSquareAdInsImp.out *** There was an error running /home/alljoyland/apps/cg.v25/mp/bin/cgmp and generating twoSquareAdInsImp **** ******************************************************** ************ cgmp: There were 5 ERRORS **************** ******************************************************** make[1]: Leaving directory `/home/alljoyland/apps/cg.v25/mp/check' .