[ourocmr] Re: Set up at Nixon this next Monday

  • From: Carl Heimberger <cjheimberger@xxxxxxxxx>
  • To: ourocmr@xxxxxxxxxxxxx
  • Date: Sun, 5 Dec 2021 08:41:22 -0800

Jake

Just to play it safe yes we have 2 corners the yard, wye and junk yard modules 
to take, as well as all the club stuff.  

Carl

Sent from my iPad

On Dec 5, 2021, at 7:01 AM, Jake Holshuh <sipapu9@xxxxxxxxxxx> wrote:

Joe and Carl - do you need my truck at the locker?
Cheers, Jake

The light at the end of the tunnel is a train.

On Dec 4, 2021, at 7:38 PM, j_parrino@xxxxxxxxxxx wrote:

1530 it is... polls pie is down the street from nixon...

On Dec 4, 2021 18:42, Carl Heimberger <cjheimberger@xxxxxxxxx> wrote:
Joe we can do that.  That may even give us a chance to grab some dinner 
before we set up.
Carl 

Sent from my iPad

On Dec 4, 2021, at 6:15 PM, joe parrino <j_parrino@xxxxxxxxxxx> wrote:

Locker time is 1600 hours. Can we make it earlier? Say 1530 Hrs.

From: ourocmr-bounce@xxxxxxxxxxxxx <ourocmr-bounce@xxxxxxxxxxxxx> on behalf 
of Carl Heimberger <cjheimberger@xxxxxxxxx>
Sent: Saturday, December 4, 2021 10:11 AM
To: ourocmr@xxxxxxxxxxxxx <ourocmr@xxxxxxxxxxxxx>
Subject: [ourocmr] Set up at Nixon this next Monday
 
Hi all OCMR members

I just found out from Harry that we have just 3 hours to set up the layout 
at Nixon on Monday after 5:00 pm, we have to be out by 8:00 pm.  So we need 
a lot of hand on deck to get the layout set up and running.  I would like 
all of you who plan to help to be at Nixon by around 4:30 so we can start 
staging the stuff that goes into the museum and unload the trailer.  The 
three members Harry, Van and Joe who have modules in the week 4 layout you 
need to get your basic module set up and electrically connected before you 
put out buildings as that if needed can be done on Tuesday morning.  We need 
to have a running layout when we leave Monday night.  Not sure what time we 
can get in on Tuesday morning but hopefully before 10 am.

So even if you do not have a module in this show we need your help in 
getting this layout set up and running, so please come and help.

Carl 

Sent from my iPad

Other related posts: