The schematic on their site for powering the device in cases
where you need to shows a 220 ohm resistor from 5V to pin 4 of the
MIDI out jack. (Pin 2 is gnd) The OSCar MIDI design (mine or the
original one)
has this exact circuit, so I suspect that it will work. Since I
haven't tested it, I can't guarantee that.
Bob Grieb
On 12/3/2022 4:44 PM, Alan O'Connell wrote:
Hello again
Would the OSCar with Tauntek mod power this wireless MIDI device from the MIDI port?
https://www.amazon.co.uk/CME-WIDI-Master-Wireless-Bluetooth/dp/B08F8F57JX/ref=asc_df_B08F8F57JX/?tag=googshopuk-21&linkCode=df0&hvadid=463215913865&hvpos=&hvnetw=g&hvrand=7621036533927673851&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046004&hvtargid=pla-1027933617287&psc=1&th=1&psc=1
Thanks