Also the area between the tables and safety can be cut using level 5, just stop
the blades around any graveled areas.
Dc
Sent from my iPhone
On Apr 29, 2020, at 6:11 PM, Dennis Christianson <DenC23@xxxxxxxxxxx> wrote:
Mower settings I used on the field.
I set the cutting level to 5 and did one Clockwise lap around the perimeter.
Then set it to 4 for remainder of the field going counterclockwise from
outside to middle of field so you don’t have cuttings build up. If grass is
real long you may have to do one pass at 5 and recut at 4. Lower settings
than 4 tend to scalp the grass down to dirt in many spots and kick up rocks,
bad for the blades.
Have fun
Dennis C
Sent from my iPhone