SOLVED Re: openvms RAC won't start
- From: John D Parker <orclwzrd@xxxxxxxxx>
- To: oracle-l <oracle-l@xxxxxxxxxxxxx>
- Date: Fri, 20 Oct 2006 07:49:36 -0700 (PDT)
As usual, Oracle reported an incorrect error. Just as a wild guess, I reduced
the dml_locks on the second instance from 13800 to 10000. It started just fine.
Apparently there is some VMS system parameter set too low.
Thanks to all that pried open that trap door in the back of their brain to
access VMS bits!
john
Barbara Baker <barb.baker@xxxxxxxxx> wrote: John:
Take a look at your ora_root:[dbs]SID_<instance_name>.properties file.
Tell me what's in there.
Barb
(call me at 303-954-5384 if you need to.)
On 10/17/06, John D Parker <orclwzrd@xxxxxxxxx> wrote: I almost hate to ask,
but here goes...
Adding a second instance to VMS RAC. It was not previously configured as RAC.
After issueing the startup command, the error returned is "ORA-00061: another
instance has a different DML_LOCKS setting". This is not true, the init file
for each instance has the exact same setting. The files are copies of each
other with the proper entries changed. OpenVMS V7.3-2 and Oracle 9.2.0.5.0.
I've managed to forget most of my VMS knowledge so any help would be
appreciated.
Thx!
John
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates
starting at 1¢/min.
---------------------------------
How low will we go? Check out Yahoo! Messenger?s low PC-to-Phone call rates.
Other related posts:
- » SOLVED Re: openvms RAC won't start
