Hi John, Thanks very much.The alert log reads as cluster interconnect IPC version:Oracle UDP/IP IPC Vendor 1 proto 2 Version 1.0 You are correct. It is using the public interconnect as the RAC interconnect. I should ask them to change this immediately. Best Regards Sriram Kumar On 3/14/06, john d parker <orclwzrd@xxxxxxxxx> wrote: > > Did you follow the "step-by-step" doc on metalink for 9i and veritas? > or even the dbac install guide? There is a step in there where you copy > the gxn2 and gxp libraries. These enable Oracle to use the LLT > transport under VCS. Also, look at the alert.log entries from startup, > if it says ORACLE UDP/IP you are using the slow public interconnect, if > it says Veritas IPC, you are using the fast VCS cluster interconnect. I > actually just did this with a client. > > John > > --- Sriram Kumar <k.sriramkumar@xxxxxxxxx> wrote: > > > Hi, > > > > Any one running 9i RAC on Solaris 9 (Using Veritas cluster)?. If yes > > can you > > get me the output of the following unix command? > > > > netstat -ni > > > > > > in the output of this command is your RAC (private) interconnect > > listed? > > > > Best Regards > > > > Sriram Kumar > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com >