If using the actual IP, using the LO device or using the actual hostname of the machine all fail, please post the contents of the listener.log file. I believe Raj's suggestion of using the lo device would work. Since this is a windows machine I'm gonna take a wild guess and assume you are using your laptop or something similar... also OEM might be a bit complicated to set up using a dynamic IP. If this is an actual server, then use the server's hostname/public IP and you should be fine. Cheers Alan.- On Sat, Feb 25, 2012 at 4:52 PM, Antony Raj <ca_raj@xxxxxxxxx> wrote: > do you use a static IP? if yes, then use the machine name or IP instead of > localhost in the listener config. > If not possible, you must have configured MS loopback adapter and use it > in listener configuration. > > > ------------------------------ > *From:* Eriovaldo Andrietta <ecandrietta@xxxxxxxxx>ple > *To:* Guillermo Alan Bort <cicciuxdba@xxxxxxxxx> > *Cc:* ORACLE-L <oracle-l@xxxxxxxxxxxxx> > *Sent:* Saturday, February 25, 2012 12:20 PM > *Subject:* Re: Issue with listener > > Guillermo, > I created it using netca. > First I removed the windows service via sc command. > > Then re-create the listener. > > Thanks > Eriovaldo > > On Sat, Feb 25, 2012 at 12:11 PM, Guillermo Alan Bort > <cicciuxdba@xxxxxxxxx>wrote: > > > did you create the listener with netca? > > > > cheers > > Alan.- > > > > > > > -- > //www.freelists.org/webpage/oracle-l > > > > > -- //www.freelists.org/webpage/oracle-l