Folks In AWR, in the section "Segments by Row Lock Waits" , What does the column "% of Capture" mean? .. From an AWR Report taken from a Benchmark Run, there exists Only 1 entry specifying the index IDX_INTERFACE_REQUEST_DTL_TBL with "% of Capture" = 100% Qs. What does this mean? Is the following index HOT / Lock waits? Any advice / links will help. Cheers & Thanks V much Vivek P.S. Segments by Row Lock Waits * % of Capture shows % of row lock waits for each top segment compared * with total row lock waits for all segments captured by the Snapshot Owner Tablespace Name Object Name Subobject Name Obj. Type Row Lock Waits % of Capture TBAADM IDX_LOG_HISTORY IDX_INTERFACE_REQUEST_DTL_TBL INDEX 1 100.00 **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***