[optimal] Re: Topcon OIS Fundus picture problem
- From: Frank Flanagi <flanang@xxxxxxxxx>
- To: "optimal@xxxxxxxxxxxxx" <optimal@xxxxxxxxxxxxx>
- Date: Fri, 29 Jun 2012 09:31:28 -0400
I have a 3200 system that will occasionally produce the same type of of images.
Sent from my iPhone
On Jun 29, 2012, at 6:32 AM, angiolith@xxxxxxx wrote:
> Since I'm on digest, I can't see the photos. That said, and without knowing
> what brand digital camera the system uses, may I suggest that besides
> reseating the cables, etc., you make sure to unplug both the power and the
> data cables (if separate) on the camera end. We have had problems with
> static electricity occasionally frying the circuitry in our firewire 5mp
> camera (can't remember the make, but it was used by both Topcon and MRP in
> the last 3-4 years). We have to unplug at the camera end and wait about a
> minute to clear the CMOS fully before starting everything up again. Voila!
>
>
> Marty Rothenberg
> Angiographics, Inc.
>
>
>
>
Other related posts:
