Hi Denice,
The spacing needs a density of at least 60 microns or less for en-face or
transverse imaging. Section 9.5.7 of the 6.6 user's manual talks about
transverse section analysis. I will send this offline, as it's too large for
optimal.
Call me if you have any questions.
Heather
Heather Oakes, CRA, OCT-C
Clinical Affairs and Applications Specialist
Heidelberg Engineering, Inc.
10 Forge Parkway | Franklin, MA | 02038
www.HeidelbergEngineering.com<http://www.heidelbergengineering.com/> |
www.spectralis.info<http://www.spectralis.info/>
Tel: 508-530-7837
Mobile: 508-570-8553
Email:
Heather.Oakes@xxxxxxxxxxxxxxxxxxxxxxxxx<mailto:Heather.Oakes@xxxxxxxxxxxxxxxxxxxxxxxxx>
From: optimal-bounce@xxxxxxxxxxxxx [mailto:optimal-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Steffens, Tim
Sent: Friday, March 03, 2017 2:08 PM
To: optimal@xxxxxxxxxxxxx
Subject: [optimal] Re: New Software Heidelberg Spectralis
All Heidelberg OCTs do EnFace imaging. You need software version 6.0 or higher
I believe.
Thanks,
Tim
From: optimal-bounce@xxxxxxxxxxxxx<mailto:optimal-bounce@xxxxxxxxxxxxx>
[mailto:optimal-bounce@xxxxxxxxxxxxx] On Behalf Of CPMC Ophthalmic Diagnostic ;
Center
Sent: Friday, March 03, 2017 1:10 PM
To: optimal@xxxxxxxxxxxxx<mailto:optimal@xxxxxxxxxxxxx>
Subject: [optimal] New Software Heidelberg Spectralis
Does the OCT2 software provide for En Face imaging?
3-D segmentation?
Denice
**********************************************************
Electronic Mail is not secure, may not be read every day, and should not be
used for urgent or sensitive issues