[nas-2000] Re: RE : Re: Dual HDD NAS (SATA) Firmware

  • From: gtx coms <gtxcom@xxxxxxxxxxxxx>
  • To: <nas-2000@xxxxxxxxxxxxx>
  • Date: Wed, 9 Jan 2008 15:40:18 +0000

Hello Samual,
 
I can't thank you enough; just a few more questions, I hope you don't mind!
 
> unsing [MRT kernel + any (ramdisk + boot + hddapp)] on> DUAL HDD NAS - Sata : 
> for only the 2 disk are detectedAt the moment I only have one hard disk 
> drive, but I am planning on adding another in the near future; does this mean 
> I should wait until I have added the second disk, as the new firmware may not 
> detect one disk on its own?
 
> > 2) Are you now able to install other ipkg packages> > on the SATA NAS, e.g. 
> > TwonkyMedia?> > I have not tested this. I _think_ it should work.I 
> > appreciate your honesty; if you don't mind I may start another thread on 
> > this subject specifically, please feel free to comment.
 
Finally, would you repeat this process each time MRT or Tinky release an 
upgrade to their firmware?
 
Thanks again
 
George
 



> Date: Wed, 9 Jan 2008 10:31:01 +0100> From: samuel_burg@xxxxxxxx> Subject: 
> [nas-2000] RE : Re: Dual HDD NAS (SATA) Firmware> To: nas-2000@xxxxxxxxxxxxx> 
> > > 1) Can I assume that using this method you have not> > lost the use of 
> one hard disk drive; I know this> > sounds obvious, but I don't wish to take 
> any thing> > for granted!> > unsing [Tinky kernel + any (ramdisk + boot + 
> hddapp)]> on DUAL HDD NAS - Sata : for only the first disk is> detected > > 
> unsing [MRT kernel + any (ramdisk + boot + hddapp)] on> DUAL HDD NAS - Sata : 
> for only the 2 disk are detected> > > So, if you have 2 disk, you should 
> better use the MRT> kernel. Read forward to know how to use MRT kernel> with 
> Tinky soft.> > Don't worry, be happy, as you can allway flash back> any MRT 
> firmware if you don't flash the [redboot] of> your NAS.> > > 2) Are you now 
> able to install other ipkg packages> > on the SATA NAS, e.g. TwonkyMedia?> > 
> I have not tested this. I _think_ it should work. > > > 3) As I mentioned, I 
> am now using the most recent> > MRT firmware without telnet access; from here 
> how> > would I go about upgrading my firmware as you> > suggest?> > This is 
> not an issue, as you must upgade using the> redboot. There is a doc about 
> this on the> Flip/Nas-2000 blog/forum. Dual Hdd Nas IDE/SATA and> 
> NAS-1000/2000 have the same redboot system.> > To access the redboot, you 
> need to do something like :> > reboot your nas> ...> telnet 192.168.2.71 
> 9000> ...> ctrl+C> ...> > look in the attached file [DUAL-NAS-rescue.txt]> 
> it's a personnal doc for linux fedora core. It explain> how to upgrade only a 
> part of the flash (exaclty what> you _WANT_ to do). You should be able to do 
> this from> a windows box.> > You _MUST_ know :> - don't flash the boot 
> process : useless and dangerous> - download Tinky [hddapp] and [ramdisk] (not 
> the> [tinky-2_3_2-mu****.tar.gz])> - install a [tftp] server in your computer 
> (this is> the better/easyest way to upload file from computer to> NAS)> > 
> Work hard, and remember :> > "The only way to get smarter is by playing a 
> smarter> opponent"> Fundamentals of Chess - 1883> > Good luck,> > Samuel 
> Burg> > > --- gtx coms <gtxcom@xxxxxxxxxxxxx> a écrit :> > > Hi Samual,> > > 
> > Thanks for your reply, which is very interesting; I> > was under the 
> impression that Tinky was no longer an> > option!> > > > Just a few questions 
> please -> > > > 1) Can I assume that using this method you have not> > lost 
> the use of one hard disk drive; I know this> > sounds obvious, but I don't 
> wish to take any thing> > for granted!> > > > 2) Are you now able to install 
> other ipkg packages> > on the SATA NAS, e.g. TwonkyMedia?> > > > 3) As I 
> mentioned, I am now using the most recent> > MRT firmware without telnet 
> access; from here how> > would I go about upgrading my firmware as you> > 
> suggest?> > > > Once again, please note I am a beginner, so any> > basic 
> instructions would be much appreciated.> > > > Thanks again> > > > George> > 
> > > > Date: Tue, 8 Jan 2008 12:45:03 +0100> > > From: samuel_burg@xxxxxxxx> > 
> > Subject: [nas-2000] Re: Dual HDD NAS (SATA)> > Firmware> > > To: 
> nas-2000@xxxxxxxxxxxxx> > > > > > hi,> > > > > > well, I have 3 DUAL HDD NAS 
> : 2x IDE (80+80 Gb &> > > 200+200 Gb) & 1x SATA (300+300 Gb).> > > > > > IDE 
> NAS with MRT firmware, + some customisation> > > (+telnet, +root password, 
> -printer)> > > > > > SATA NAS with ... Tinky !> > > > > > First of all : do 
> not flash your Dual Hdd Nas with> > > Tinky "all in one" firmware ! Better to 
> download> > the> > > firmware in separated part (boot - kernel -> > ramdisk 
> -> > > hddapp) and then flash only kernel+ramdisk+hddapp> > (you> > > don't 
> need to upgrade the boot, and it's very> > > dangerous).> > > > > > In fact I 
> only use ramdisk + hddapp from Tinky,> > and> > > boot + kernel from MRT.> > 
> > > > > Why ?> > > > > > Because SATA in dual hdd nas ... in not SATA ...> > 
> it> > > seems that there is an internal sata/ide converter> > (2> > > ide 
> controler for 2 sata disk), so the "ide-only"> > > Tinky kernel work !> > > 
> BUT ... the Tinky kernel only use the ide primary> > > controler ... so the 
> second SATA disk cannot be> > used> > > with this kernel ... so I use the MRT 
> kernel with> > the> > > Tinky ramdisk + hddapp.> > > > > > Good luck !> > > > 
> > > Samuel Burg> > > > > > > > > PS : I've also try to customize the rd's 
> scripts> > in> > > tinky firmware but ... I've totaly failed ! Duh !> > ...> 
> > > flash back ...> > > > > > PS-2 : Does someone have a QEMU (or any other> 
> > > virtualizing software) arm-32 virtual system> > > simulating a NAS-2000 
> or Dual-Hdd-NAS, to build,> > test> > > and _crash_ soft without danger ?> > 
> > > > > > > > > > > > >> 
> _____________________________________________________________________________>
>  > > > > Ne gardez plus qu'une seule adresse mail ! Copiez> > vos mails vers 
> Yahoo! Mail http://mail.yahoo.fr> > > > > > >> 
> _________________________________________________________________> > Get 
> Hotmail on your mobile, text MSN to 63463!> > 
> http://mobile.uk.msn.com/pc/mail.aspx> > > > 
> _____________________________________________________________________________ 
> > Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! 
> Mail http://mail.yahoo.fr
_________________________________________________________________
Who's friends with who and co-starred in what?
http://www.searchgamesbox.com/celebrityseparation.shtml

Other related posts: