[moneytalks] Re: Check won't print

  • From: Pamela Drake <pamdrake@xxxxxxxxxxxxx>
  • To: "moneytalks@xxxxxxxxxxxxx" <moneytalks@xxxxxxxxxxxxx>
  • Date: Mon, 22 Apr 2019 21:26:56 +0000

Steve,

I have never had any problem with margins but will see if I can figure out how 
to clear the printer buffer. My calibration has not needed changing except when 
I have needed to purchase a new box of checks. Thank you for the information.  

I wonder if there are any plans to update Money Talks. 

Pam 

On Apr 22, 2019, at 2:10 PM, Steve Jacobson <steve.jacobson@xxxxxxxx> wrote:

Hi,

I hate to say this, but it is possible that the problem is not with 
MoneyTalks.  I've had several occasions during the past couple of years that 
updates to my printer driver that came automatically with Windows have caused 
me a problem.  In particular, I have seen the "unprintable margins" change at 
times which has required I adjust my check calibration.

The second issue may or may not have a MoneyTalks solution.  Sometimes I have 
found that printing other documents can leave a left-over line in the print 
buffer.  I have started routinely clearing my printer before printing a check 
and that has eliminated problems with checks occasionally printing lower.  On 
my printer, I can clear my printers buffer by holding down the "cancel" 
button for a couple of seconds, but that will very with the printer.  Whether 
there is some sequence MoneyTalks could send that would do this 
automatically, I do not know.  Pam, if you can't find a way to clear your 
printer's buffer, it might be worth trying to turn your printer off and then 
on before printing a check and see if printing becomes more consistent.  

Best regards,

Steve Jacobson

-----Original Message-----
From: moneytalks-bounce@xxxxxxxxxxxxx <moneytalks-bounce@xxxxxxxxxxxxx> On 
Behalf Of Pamela Drake
Sent: Monday, April 22, 2019 2:12 PM
To: moneytalks@xxxxxxxxxxxxx
Subject: [moneytalks] Re: Check won't print

Hello!

I have this problem as well. It appears to be intermittent. 

Also, A few months ago I had a problem where the writing was too low on the 
check even though the check was inserted in the printer correctly.

Yes, I would like to see an update to this program as well. I am still using 
Windows 7.

On Apr 22, 2019, at 8:05 AM, Gail Elam <gailelam63@xxxxxxxxxxx> wrote:

Hi all, never run into this before but my check won't print though my 
printer is working fine. All items show up on money talks such as 
amount, payee and so on. Any ideas how to solve this? Wish there would 
be an update for this software some day. Running the upgrade for windows 
10 and latest jaws.! Thank you.

Gail

�{.n�+���zwZ��,j
��kkz�����y�b��(��v���{.n�+�����^���y�E�W�jǦ�
��칻�&ޱ��jg��������z�_�祊�l����n��칻�&ފ{az˛��-)^����r

To unsubscribe, send a message to mt-request@xxxxxxxxxxxxx and put 
unsubscribe in the subject** File was empty **

Other related posts: